Homebrew PCBs

Thanks for the reply, Victor.  Are you using it with toner transfer 
paper or with regular glossy paper?  Do you get your good results 
with just one pass through the laminator or do you have to make more 
than one pass?

Thanks again,

Bob

> Yes ,I'm using the laminator
> I have had 100% results since starting to use it.
> regards
> victor
> ----- Original Message ----- 
> From: "Bob & Linda Gardner" <gardner.bob@...>
> To: <Homebrew_PCBs@yahoogroups.com>
> Sent: Friday, November 28, 2003 1:21 PM
> Subject: Re: [Homebrew_PCBs] Toner Transfer questions...
> 
> 
> > Hi Anthony,
> > 
> > I'm about the same place you are, learning to make PCBs using the
> > toner transfer method.  I went to a local chain of paper stores
> > called The Paper Zone and got samples of numerous types and weights
> > of clay coated paper and ran numerous trials.  I have settled on the
> > gloss coated 80# paper shown in the link below:
> > 
> > http://www.paperzonestore.com/cgi-bin/paperzon/WEGW1180.html
> > 
> >> 
> > 
> > 
> 
> 
> ------------------------ Yahoo! Groups Sponsor
> ---------------------~--> Buy Ink Cartridges or Refill Kits for your
> HP, Epson, Canon or Lexmark Printer at MyInks.com. Free s/h on orders
> $50 or more to the US & Canada.
> http://www.c1tracking.com/l.asp?cid=5511
> http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/bGYolB/TM
> ---------------------------------------------------------------------~
> ->
> 
> Be sure to visit the group home and check for new Bookmarks and files:
> http://groups.yahoo.com/group/Homebrew_PCBs
> 
> To unsubscribe from this group, send an email to:
> Homebrew_PCBs-unsubscribe@yahoogroups.com
> 
> 
> 
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/ 
> 
>