Yahoo Groups archive

Homebrew PCBs

Index last updated: 2026-04-28 23:05 UTC

Message

RE: [Homebrew_PCBs] Soldering a LQFP 48 on a home made PCB

2014-11-08 by Boman33

As so many others have suggested bare pads with lots of flux is the way to go.

I would in addition as a first step also brighten up the pads with “Scotch-Brite” scouring pad to remove any stubborn oxidations.

Bertho

Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.