Homebrew PCBs

--- In Homebrew_PCBs@yahoogroups.com, Stefan Trethan 
> >> best by far and pretty easy to get. Just one thing is not to 
feed it
> >> directly to the printer since it will most probably get stuck, 
instead i
> >> hold it on a normal paper with some tape and insert the whole 
stuff to 
> >> the
> >> printer.
> >
> > Plastic tape against heated rollers is a bad idea is it not?
> >
> >
> 
> using paper masking tape is a much better idea, you are right.

They do produce stickers just for this type of thing.  I had a bunch 
of these from a foil transfer kit.  I believe they were just regular 
labels, the backing was a 3M glue.  The idea is to not use anything 
that might melt as Russell suggested or an adhesive that might ooze 
when heated and contaminate the photoconductor unit.

I did cut down stock taped it to paper carriers when I used the 
expensive dynaart papers; but with magazine stock there's little 
point.  At least on my 5L transport, whole pages aren't a problem.  
YMMV.