Homebrew PCBs

"Roger Blair Roger.Blair@... [Homebrew_PCBs]"
<Homebrew_PCBs@yahoogroups.com> writes:

> Mathew,
> I see you are making good progress on your E260 project, and  am very 
> much interested in your Arduino controller effort. I just modified an 
> E260dn, but working with Mark to cure a jam problem. I was looking for 
> an Arduino solution initially, but hadn't found anything so when I 
> discovered Mark's project I jumped right in. I would still like to have 
> an Arduino as a replacement if necessary, or as an alternate for 
> backup.  I downloaded your github stuff, but with practically no 
> programming experience, I can only follow along with you great folks 
> "in-the-know"... Do you have some info on the Arduino hardware you would 
> like to share?.

I don't have any special hardware.  I built my arduino up just like his
attiny example.  The only difference in my set up is i used a 10k
resistor instead of a 5k.  If you need anymore help let me know.  the
source labels all the pins where they correspond.  I started getting
great results https://imgur.com/5KJv3jT

> Thanks,
> Roger
>