Homebrew PCBs

So the offset of the board thickness does not cause a slight misalignment?

----- Original Message ----- 
From: "Tony Mattioli" <tmattioli@...>
To: <Homebrew_PCBs@yahoogroups.com>
Sent: Sunday, January 18, 2004 10:21 PM
Subject: [Homebrew_PCBs] Re: Laminating and alignment


> I use the method described above of holding the two sides up to the 
> light to align them.  I attach the two sides with a glue stick.  
> This holds them well and doesn't interfere with the laminator.  
> Works perfectly every time.  I've never had a misalignment.
> Tony
> 
> --- In Homebrew_PCBs@yahoogroups.com, "dkesterline" 
> <desterline@t...> wrote:
> > Looking for other peoples experiance with aligning double sided TT 
> > through a laminator.
> > 
> > I just tried to laminate my first DS board. I stuck down one side, 
> > removed the paper so I could drill a couple alignment holes and 
> tried 
> > laminating the other side. Totaly destroyed the toner on the first 
> > side.
> > 
> > So what do other people do?
> > 
> > -Denny
> 
> 
> Be sure to visit the group home and check for new Bookmarks and files:
> http://groups.yahoo.com/group/Homebrew_PCBs 
> 
> Yahoo! Groups Links
> 
> To visit your group on the web, go to:
>  http://groups.yahoo.com/group/Homebrew_PCBs/
> 
> To unsubscribe from this group, send an email to:
>  Homebrew_PCBs-unsubscribe@yahoogroups.com
> 
> Your use of Yahoo! Groups is subject to:
>  http://docs.yahoo.com/info/terms/ 
> 
>