Homebrew PCBs

I forgot to also add this paper as well.

<www.lib.kth.se/Sammanfattningar/brunahl030602.pdf>

It has a good section at the beginning on different inkjet head 
designs and technologies.

--- In Homebrew_PCBs@yahoogroups.com, "javaguy11111"
<javaguy11111@y...> wrote:
> If there was a way to get the printheads here you could try to 
> build your own. 
> 
> <http://www.trident-itw.com/solidjet.asp?n=pa&toc=pl&pl=sj>
> 
> This company sells high temperature printheads to print
> solder onto CSP devices.
> 
> <http://www.microfab.com/equipment/printheads.html>
> 
> 
> 
> --- In Homebrew_PCBs@yahoogroups.com, Brian Pitt <bfp@e...> wrote:
> > anybody thinking about these for direct to board resist printing?
> > http://www.office.xerox.com/solidink//how.html
> > 
> > only problem is finding a used one cheap enough to hack the case
> > they run $1000+ new and not much less than half that on ebay
> > (maybe in a few years eh :)
> > 
> > I've seen the output from one ,it lays down enough wax to make
> > plain copy paper as thick as the heavy glossy photo papers 
> > just right for slapping down a resist layer on a board
> > 
> > Brian
> > -- 
> > "Nemo me impune lacesset"