Homebrew PCBs

I did a 3"X4" 2-layer board drawn with eagle. I had what you might call 
a "low yield" process that usually needed touchups. Registration was 
done by eye, and I pressed both layers at the same time. I could get 
smaller features to transfer sometimes. Text was either patchy or 
smeared, but sometimes looked great.

mickeym

Stefan Trethan wrote:

>>BTW, I have been using the "cheap glossy photo paper and a clothes iron"
>>method with fair results using 0.024 widths.
>>    
>>
>
>are that inches?
>
>7mil are well possible with toner transfer, which is the liit of my 
>printer not the transfer.
>
>i have better results using a copier fuser than a iron.
>
>ST
>  
>