Homebrew PCBs

--- In Homebrew_PCBs@yahoogroups.com, Stefan Trethan 
<stefan_trethan@g...> wrote:
> doing small series really speeds up the learning curve...
> 
> i tried 1 run through the fuser -> 2 small errors where the toner 
didn't 
> stick.
> 
> later i remembered i used laquer thinner instead of denatuerd 
alcohol to 
> clean this time.
> 
> so i made the 3rd board with denatured alcohol cleaning again and 1 
run,
> -> no errors.


I have found that the slightest fingerprint on the surface will 
prevent a good transfer.

Dave