Homebrew PCBs

I didn't find Eagle that user friendly but that was a few version back. I
will give it a shot again but the French program and the PcLogic, which I
purchased, are simple to use and generate very good boards. Both have Gerber
274x for sending in if you want someone else to make your board.

One of the nice features of PcLogic is you can throw some pads down in the
middle of your drawing.Then you can draw the outline of the part and with a
few clicks make that a part and name it. For $25 you can't beat it for the
lite version if you don't need autorouter.

The French program is for people getting started and need something simple
and free. Everyone knows where the File is at the top, all windows programs
are the same in general and numbers are numbers a Lm339 is a Lm339 in
French.

Derek

 -----Original Message-----
From: Alan Marconett KM6VV [mailto:KM6VV@...]
Sent: Wednesday, January 09, 2002 11:44 AM
To: Homebrew_PCBs@yahoogroups.com
Subject: Re: [Homebrew_PCBs] New file uploaded to Homebrew_PCBs


  Hi Derek,

  For English, why not just use Eagle?  There are board size restrictions.

  Alan  KM6VV


  High Tech wrote:
  >
  > Here is the manual us English speaking people have to use the Babel fish
to
  > convert it.
  > http://etronics.free.fr/dossiers/softs/soft03.htm
  > Babel fish web trans:
  > http://world.altavista.com/tr
  > Derek
  >   -----Original Message-----
  >   From: High Tech [mailto:hightechsystems@...]
  >   Sent: Tuesday, January 08, 2002 9:47 PM
  >   To: Homebrew_PCBs@yahoogroups.com
  >   Subject: RE: [Homebrew_PCBs] New file uploaded to Homebrew_PCBs
  >
  >   Steve
  >   The web link is in the bookmarks. It is Freeware from the author Bruno
  >   Urbani's web site
  >   http://b.urbani.free.fr/
  >
  >   Derek


  To unsubscribe from this group, send an email to:
  Homebrew_PCBs-unsubscribe@yahoogroups.com



  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]