Yahoo Groups archive

Homebrew PCBs

Index last updated: 2026-04-28 23:05 UTC

Message

Re: [Homebrew_PCBs] Re: CuCl etching

2004-10-04 by Stefan Trethan

On Mon, 04 Oct 2004 02:02:17 -0000, Phil <phil1960us@...> wrote:

>
>
> Agreed, glass is far better but...  31% HCl is sold in the US
> (probably elsewhere) in plastic gallon bottles.  I've had one sitting
> in my basement from when I finished my remodel and they acid washed
> the brick.  Its about 1/2 full and no problems (no residue, container
> was fine).  SG test showed it to have the correct SG.  My remodel was
> finished 3 years ago.  The recycle logo (2) on the bottle says it HDPE.
>


Same here. But after years (2 or 3)  salt forms on the ouside of the  
bottle.
also the plastic gets dimples. i put it in a cutoff "outer" bottle so i  
needn't touch
the salts. Not a problem but it is very slightly attacked. The salts  
seemed to form faster on the bottle i used to store the CuCl, which was a  
PP bottle i think.
I wonder a lot about this hcl brick washing thing. I hear it so often i  
must ask
google for a description.

ST

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.