Homebrew PCBs

I recently bought a new Dremel press and the picture on the box shows the usual hole in the centre of the base where the drill bit goes through the base when drilling, only when I opened it, it didn't have the hole!
I'm not really sure why...

Kev/.
  ----- Original Message ----- 
  From: cybermace5 
  To: Homebrew_PCBs@yahoogroups.com 
  Sent: Wednesday, November 17, 2004 9:29 PM
  Subject: [Homebrew_PCBs] Re: PCB Driller



  --- In Homebrew_PCBs@yahoogroups.com, "mikezcnc" <eemikez@c...> wrote:
  > 
  > Earl mentioned www.drillcity.com and that reminded me that I need to 
  > get a driller capable of drilling PCBs. What kind of machine can you 
  > suggest for manual drilling? www.pulsa.gs suggested Micro-mark which 
  > is about $150. Is there something less exensive that does the job or 
  > something that expensive that would do a better job? Mike

  A Dremel press works, though you really need to make sure your rotary
  tool has good bearings up front. Any wobbling or vibration will
  eventually snap a drill. So, you're not going to want the rotary tool
  from Harbor Freight. Of course you can be like me, and build a little
  CNC drill, but after putting in the required materials, funds, and
  time a $150 tool seems like a great deal.





[Non-text portions of this message have been removed]