Homebrew PCBs

I've found quite a few NPN parts, but most of them are substituting a 
400v part for a 100v part...pretty broad range for a replacement part.
> 
> I show that as being an NPN Silicon transistor with a Vce of 45V,  
an Ic(max) 
> of 800mA,  a power rating of 625mW,  and a beta range of 160-400 
(((SNIP)))
> > http://www.vishay.com/docs/88501/1500z.pdf
> > b40c1500r - 1.5a bridge rectifier
> > elfa#70-050-93
> > $1.08 EU
> 
>
((SNIP))> 
> See above.  And feel free to point me at a schematic someplace (if 
it's 
> online) or shoot me a copy in email (if it's not) and we'll take it 
from 
> there.

Here is the schematic
http://home.no.net/paolsen/mj/dnl/Schematic.pdf

here is the partlist
http://home.no.net/paolsen/mj/slncmst_p10.html

Parts BR1 and Q1.

This schematic is a control station with a built in power supply.  
This control station generates electronic pulses through model RR 
tracks which are decoded by chips within individual locomotives 
(model RR has an electronics part of the hobby, by the way).

I'm trying to rebuild the schematic into a board design through 
Eagle.  There are PDF files of the board as designed, but I can't 
convert PDF files into eagle files.
They are located at 
http://home.no.net/paolsen/mj/dnl/SLNCMST11_layout.zip

Anyone know how to convert pdf's into eagle board files?

Thanks again!