Homebrew PCBs

> Yea i have seen the schem. and you can feed it with a wall-wart.
> You need about 17V or more of DC on the 7815 input for it to work  
> properly, how you get that doesn't matter.
> In case you get a wall-wart with regulated output of 15V you can 
hook the  
> 7805 to that and connect without the 7815 to 15V.
> 
> You know this is getting pretty off topic, there is another group,  
> Electronics_101@yahoogroups.com, where most of the people here are 
also  
> around and where it is much more on topic.
> 
> ST

Thanks for the info, I'll check that group out for more technical 
questions.  To get back on the topic of board design...

In my previous post, I listed the link for the PDF board files (in 
addition to the schem).  Is there an easy way to convert this to an 
eagle file?  This was the reason I first posted, as I have to redraw 
the schematic to a board and couldn't find american versions of the 
two listed parts.  If I could convert the pdf to a board, half of my 
problem would be solved.  Then I could ask the other forum about 
electronic part suggestions.

GC