Yahoo Groups archive

Homebrew PCBs

Index last updated: 2026-04-28 23:05 UTC

Thread

Free Photoexposure Box

Free Photoexposure Box

2010-12-20 by tgr8883

Hi everyone,

I have a photoexposure box I'd like to donate to whoever can use it.  I built it myself about two years ago, but I've since upgraded.  It's a cube with approximately 18" sides.  Inside it there are six 100W equivalent CFL's compatible with MG Chemicals' pre-sensitized boards, each of which are mounted inside pseudo-parabolic, mylar-coated reflectors.  There's also a collimator made of ~0.75" thick grating painted matte black.

It has a plug for standard 110VAC outlets.

I only ask that you pay shipping costs.  Please feel free to contact me privately if you're interested.

Thanks!



-Paul

Re: [Homebrew_PCBs] Free Photoexposure Box

2010-12-20 by muhammad rizqi

Hi Paul

Please inform me the shipping costs to Jl.Parangtritis No.136 Yogyakarta 
Indonesia
I am very interested in your photoexposure box, I hope i can get it

Thanks and Best Regards
Rizqi
Phone : +62 815 780 73129
http://www.facebook.com/#!/profile.php?id=100001106928487&v=info
http://hydrogenindonesia.blogspot.com/





________________________________
Show quoted textHide quoted text
From: tgr8883 <paul@...>
To: Homebrew_PCBs@yahoogroups.com
Sent: Mon, December 20, 2010 7:30:51 PM
Subject: [Homebrew_PCBs] Free Photoexposure Box

  
Hi everyone,

I have a photoexposure box I'd like to donate to whoever can use it.  I built it 
myself about two years ago, but I've since upgraded.  It's a cube with 
approximately 18" sides.  Inside it there are six 100W equivalent CFL's 
compatible with MG Chemicals' pre-sensitized boards, each of which are mounted 
inside pseudo-parabolic, mylar-coated reflectors.  There's also a collimator 
made of ~0.75" thick grating painted matte black.

It has a plug for standard 110VAC outlets.

I only ask that you pay shipping costs.  Please feel free to contact me 
privately if you're interested.

Thanks!

-Paul


 


      

[Non-text portions of this message have been removed]

Re: Free Photoexposure Box

2010-12-24 by Fabio

Hi Paul,

I saw your kind offer on the group. If you still have it, I would be very interested in taking it off your hands.  It sound like a very carefully made unit.  I am in San Diego (CA), so shipping shouldn't be too bad.

If you gave it to someone who needs it more than I do, I wish them happy exposures.  Please let me know.

Thanks and Happy Holidays,
Fabio


--- In Homebrew_PCBs@yahoogroups.com, "tgr8883" <paul@...> wrote:
Show quoted textHide quoted text
>
> Hi everyone,
> 
> I have a photoexposure box I'd like to donate to whoever can use it.  I built it myself about two years ago, but I've since upgraded.  It's a cube with approximately 18" sides.  Inside it there are six 100W equivalent CFL's compatible with MG Chemicals' pre-sensitized boards, each of which are mounted inside pseudo-parabolic, mylar-coated reflectors.  There's also a collimator made of ~0.75" thick grating painted matte black.
> 
> It has a plug for standard 110VAC outlets.
> 
> I only ask that you pay shipping costs.  Please feel free to contact me privately if you're interested.
> 
> Thanks!
> 
> 
> 
> -Paul
>

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.