Homebrew PCBs

-----Original Message-----
From: caveteursus [mailto:j.walton@...]
Sent: Wednesday, December 19, 2001 6:03 AM
To: Homebrew_PCBs@yahoogroups.com
Subject: [Homebrew_PCBs] Using HP GL/2 - direct printing etc.


I posted quite a few pages, there's more to do, but you will get the
idea.  It's on www.tech-diy.com

you can play around with the codes, create a "*.txt" file and send it
with the following commands:

mode com1:9600,n,8,1,p
copy myfile.txt com1

I use WordPad instead of NotePad, as WordPad has "find and replace"..9.3I've
taken apart some of the Gerber files generated by Ultiboard --
they can be quite simplified -- the most annoying and time consuming
is the AA -- arc absolute -- in Ultiboard a 1% angle is specified --
this can and should be changed using "find and replace" in Wordpad.



To unsubscribe from this group, send an email to:
Homebrew_PCBs-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

> I would like you to correct some of the info on your web page.
> 
> The following:
> "World's Messiest Darkroom/Electronics Laboratory"
> should read
> "World's 2nd Messiest Darkroom/Electronics Laboratory"
> 
> Daryl
> 
> -----Original Message-----
> From: caveteursus [mailto:j.walton@a...]
> Sent: Wednesday, December 19, 2001 6:03 AM
> To: Homebrew_PCBs@y...
> Subject: [Homebrew_PCBs] Using HP GL/2 - direct printing etc.
> 
> 
> I posted quite a few pages, there's more to do, but you will get the
> idea.  It's on www.tech-diy.com