Homebrew PCBs

I would like to turn an old laserjet fuser assy into a laminator. I 
was wondering if anyone had a wiring diagram for the assy? The one I 
have has 2-3plug connectors on the side that plugs it into the 
printer. Where would I apply power to get it to heat up?

Thanks in advance!
Keith

You might check on the Printer Repair list.

http://groups.yahoo.com/group/printerrepair/

Steve

--- In Homebrew_PCBs@yahoogroups.com, "Keith Applegarth" <kman@a...>
wrote:

> 
> 
> I would like to turn an old laserjet fuser assy into a laminator. I 
> was wondering if anyone had a wiring diagram for the assy? The one I 
> have has 2-3plug connectors on the side that plugs it into the 
> printer. Where would I apply power to get it to heat up?

On Tue, 05 Oct 2004 00:44:16 -0000, Keith Applegarth <kman@...> wrote:

>
>
>
> I would like to turn an old laserjet fuser assy into a laminator. I
> was wondering if anyone had a wiring diagram for the assy? The one I
> have has 2-3plug connectors on the side that plugs it into the
> printer. Where would I apply power to get it to heat up?
>
> Thanks in advance!
> Keith

I've done mine and Esteban Arias (earias@...) has done his with my
schematic and it worked well too. I have not much time right now, but i'm
sure he will send you the schematic. There are plans of making a page  
about it
but you know....

ST

Yes, I am working with Eagle to draw the schematic of the fuser circuit. I 
hope can ending this weekend and then send or upload the schematic.
(sorry, I am learning to use Eagle and I have not much time for this project)

At 10:46 a.m. 05-10-2004, you wrote:

>On Tue, 05 Oct 2004 00:44:16 -0000, Keith Applegarth <kman@...> wrote:

> > I would like to turn an old laserjet fuser assy into a laminator. I
> > was wondering if anyone had a wiring diagram for the assy? The one I
> > have has 2-3plug connectors on the side that plugs it into the
> > printer. Where would I apply power to get it to heat up?
> >
> > Thanks in advance!
> > Keith
>
>I've done mine and Esteban Arias (earias@...) has done his with my
>schematic and it worked well too. I have not much time right now, but i'm
>sure he will send you the schematic. There are plans of making a page
>about it
>but you know....
>
>ST