On 21/01/2006, at 11:49 PM, Teeroy wrote:
Cool. Then we agree, paul. Bus Objects can ALL be deleted because bus channels can go
straight to Aux Objects which are better.
Fine with one possible exception which I tried to point out in my earlier post:
If you simply want to group a bunch of lets say backing vocal tracks together into a stereo stream for compression and eq ( on your beloved aux object of course) you would use the output assignment on each individual track to send them all to one bus channel and then select that bus channel as input on the aux object you intend to do the processing on.
Normally if I was doing this I turn off the output of the bus - on the bus object - to avoid having the same signal reaching the output twice.
As I've not tried it I can't say but it's very possible that if you had no bus objects created but you were using a "bus channel" to sum the tracks to get them to the Aux then the -bus- output assignment might still be in place and the only way to change that assignment would be to go create the bus object and change it.
Regards
:::::::::::::::::::::::::::::::::::::::::::::::::::
Paul Najar
Jaminajar Music Production
www.jaminajar.com