Apple Logic Pro /LogicExpress Discussion group photo

Yahoo Groups archive

Apple Logic Pro /LogicExpress Discussion

Index last updated: 2026-04-28 23:06 UTC

Message

MS Decoding

2009-09-25 by HKC

I would like to try out but I am in doubt whether I set this up correctly. 
From what I understand I place a cardiod mic aimed at the center of the sound. As close as possible to that mic I place another figure 8 mic recording the sides. I record both signals. I copy the figure 8 track to another track and phase shift it. I pan the figure 8 tracks hard LR. I ie take the cardiod mic up to 0 Db and then slowly fade in the fig 8s until I find the right balance where I have the width that I prefer.
What am I doing wrong, all I get is the R side (the phaseshifted one) phases out the cardiod so the R side is more or less silent when listening back to the combined 3 track signal. This makes perfect sense to me since the mics are so close together that they certainly share a lot of the transients. 
I am doing something wrong or does it have something to do with the fact that I record in neutral rooms where frequencies are fairly similar in all directions and with little "room" sound.




[Non-text portions of this message have been removed]

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.