V6 motor mounts
2005-02-25 by Don Lattimer
Ash, Have you solved your engine mounts yet? I'll be jacking up my car this weekend and can take some measurements if you'd like. Don #3M5759
Thread
V6 motor mounts
Re: V6 motor mounts
2005-02-28 by Ash
Hey Don, Good to hear from you, I was actually working on it this weekend and have now sucessfully removed both mounts from the wrong positions! I've had two people measure for me and give me a measurement of 8 1/4" between the chassis upright and the mount. So if you also confirm this then I am onto a winner!! I am going to get a gearbox soon, and of course new flywheel, clutch assembly and spigot bearing, oh and propshaft as I can not get my old one out of the old box (and suspect it's got the wrong output anyway!). Lots to do! but then I'll be back on track! Ash --- In MarcosManiacs@yahoogroups.com, "Don Lattimer" <donlattimer@p...
Show quoted textHide quoted text
> wrote: > > Ash, > > Have you solved your engine mounts yet? I'll be jacking up my car > this weekend and can take some measurements if you'd like. > > Don > #3M5759
Re: [MarcosManiacs] Re: V6 motor mounts
2005-03-01 by Don Lattimer
Ash,
I measure at 8 5/8" from back side of front upright to the
front side of the motor mount. Knowing that each car was handbuilt, you
can most likely assume 8 1/2" or thereabouts will get the job done.
Don
#3m5759
Show quoted textHide quoted text
----- Original Message -----From: AshSent: Monday, February 28, 2005 11:07 AMSubject: [MarcosManiacs] Re: V6 motor mounts
Hey Don,
Good to hear from you,
I was actually working on it this weekend and have now sucessfully
removed both mounts from the wrong positions! I've had two people
measure for me and give me a measurement of 8 1/4" between the chassis
upright and the mount. So if you also confirm this then I am onto a
winner!! I am going to get a gearbox soon, and of course new flywheel,
clutch assembly and spigot bearing, oh and propshaft as I can not get
my old one out of the old box (and suspect it's got the wrong output
anyway!).
Lots to do! but then I'll be back on track!
Ash
--- In MarcosManiacs@yahoogroups.com, "Don Lattimer" > wrote:
>
> Ash,
>
> Have you solved your engine mounts yet? I'll be jacking up my car
> this weekend and can take some measurements if you'd like.
>
> Don
> #3M5759