Marcos Maniacs

Hi Maniacs,
Yet another new photo (not that it matters... they all look the 
same!)in the Mike Denman's projects in process album.  Todays photo 
shows the rear end sanded down and it is very close to being "flat and 
true".  If you look closely you can see several small spots where the 
resin is still glossy.  These are low spots and need to be filled to 
make the rear panel flat.  These spots are low by about .032" which is 
a huge improvement from the original .1875 or better that I started 
with originalyy. The plan is to fill these spots till the panel is 
absolutely flat and then apply one more layer of fiberglass.  On the 
last layer I will use "peel ply" which is an useful technique to know 
if you are working with fiberglass.
Mike Denman
1966 Marcos 1800
Chassis # 4079