Modular Synth Panels

Thanks for that! Very good advice, Paul. I'll change that on the 'Bug. 
I didn't even look at the PCB!

Scott Deyo
The Bridechamber
contact@bridechamber.com
www.bridechamber.com


On Mar 14, 2008, at 1:02 PM, krisp wrote:

> Hi Scott and all
> That's almost the same as the panels I had made by  Schaeffer picture 
> in the files somewhere  
> I used on-on-on switches to get the 50%, EG and LFO on one switch also 
> used one of them on the LFO rate switch
>  
>  
> also I think the you should have the pots in this order
>  
> Rate
> Rate CV
> Cluster
>  
>  down the left hand side as they are in that order on the PCB for easy 
> mounting to the panel
>  
>  
> Cheers
>  
> Paul Darlow
>  
>  
>  
>  
> ----- Original Message -----
>> From:  Scott Deyo
>> To: ModularSynthPanels@yahoogroups.com
>> Sent: Friday, March 14, 2008 3:15 PM
>> Subject: [ModularSynthPanels] sn voice and 'bug proposed designs
>>
>>
>> Hello Group,
>>
>> I have proposed designs in the files section, under Bridechamber 
>> Proposed Designs.
>>
>> There is a 3U SN Voice and a 2U Wogglebug.
>> Both are standard, no-mod designs.
>>
>> The only thing on the SN voice is we will use a toggle for the range. 
>> Center off will leave
>> one cap connected, up will connect a big cap in parallel, and down 
>> will connect a medium
>> cap in parallel. Much easier and less expensive than a rotary.
>> Also, I used a switch to choose between LFO and EG PWM and left off 
>> the fixed. Is OK or
>> should be try to jam a rotary in there? Or an attenuator? It will get 
>> cramped...
>>
>> I haven't heard much about the 'Bug -- some want dual 'Bugs w/ Child 
>> Tone outputs, but
>> this would make it 4U. I can do that, but I need to know what people 
>> want.
>>
>> Cheers,
>> Scott
>>
>  
>