Modular Synth Panels group photo

Yahoo Groups archive

Modular Synth Panels

Index last updated: 2026-04-28 23:10 UTC

Message

Re: [ModularSynthPanels] Re: Ev Seq finished!

2008-06-08 by Scott Deyo

I'll do that.

Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com


On Jun 7, 2008, at 2:13 PM, adaaxs wrote:

> Great, I just finished having mine drilled for leds so I can add 
> switches.
>  Maybe you could add a little wiring diagram for guidance ( like one 
> of 8) and exactly where
>  to cut the trace.
>  >
>  > hey all,
>  >
>  > so i finished my sequential switch/ event sequencer this morning. it
>  > roolz, all other seq's droolz!
>  > ; )
>  >
>  > the up/down control, the reset and inhibit controls, inverted 
> output,
>  > mix input -- what a great module!
>  > adding LFOs to certain steps makes it very very very fun, or even 
> audio
>  > -- get some FM klang on every fifth step, for example.
>  >
>  > i added a gate bus jack for the switches, w/ a diode between each 
> gate
>  > output and switch, all switches' middle lugs bussed to the jack --
>  > works great, but i used four different-colored LEDs, and not all 
> gates
>  > are at the same level (very close though). i'll take the tradeoff 
> for
>  > prettiness.
>  >
>  > the bridechamber glide DOES NOT WORK when inserted before the mixer
>  > output. the 4051 must be sendin' somethin' the glide doesn't like. i
>  > think the 358 locked up, which was weird. maybe it was the 4051,
>  > though; i didn't test it. so i put the glide after the circuit's
>  > outputs, using a dual-gang pot for glide.
>  >
>  > the audio-rate glide works well at audio-rate clocking. now if only 
> we
>  > had an ultra-sonic VCO... maybe just maybe someone will be coming 
> out
>  > w/ one pretty darn soon (hint hint)...
>  >
>  > my step selection rotary is a little weird, though. some steps are
>  > skipped, though i've checked my wiring 10 times...
>  >
>  > i love this module. there is a forest of wire back there, so put on
>  > some good tunes and relax; it'll take a while.
>  >
>  > i'll be adding final pics to the site today or tomorrow, and i'll 
> work
>  > on some sound samples too.
>  >
>  > cheers,
>  > Scott Deyo
>  > The Bridechamber
>  > contact@...
>  > http://www.bridechamber.com
>  > Jealous Edison Record Kompany
>  > http://www.jealousedison.com
>  >
>
>  
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.