Modular Synth Panels

The basic bat handle nkk switch is 
mouser part #  633-M201202-RO 
on page 1604 of the current catalog - it's figure C at the top of the page. That's what 
you'll use for the pattern switches - the other ones are listed below that, but I don't 
remember which ones exactly - you can figure it out I'm sure. I used the figure A ones, 
saved a bunch of money. 

The spectrol pots I used are mouser # 594-249-7503. Warning - they've gotten hideously 
expensive, look for alternatives if possible. If you go the spectrol route, I highly advise pot 
chiclets - John Lofflink sells them - google that - don't have the link handy. 


--- In ModularSynthPanels@yahoogroups.com, "Steve" <steve@...> wrote:
>
> Okay V1.1 prelim is up of the BOM- I just need some help on the proper
> switches- the *good* bat handle ones- and verification of the 50K
> Spectrol pot being the right one- and then it will be ready...
> 
> Thanks everyone so far!
> 
> 
> 
> --- In ModularSynthPanels@yahoogroups.com, "Steve" <steve@> wrote:
> >
> > whew I knew something was wrong when I looked at...
> > I'm still perfecting the art of going quickly through these catalogs-
> > anyone have recommendations for part numbers for those best bat handle
> > switches?
> > 
> > Thanks in advance- when I get this BOM reliable I'll let everyone know
> > 
> > --- In ModularSynthPanels@yahoogroups.com, "babysealclub"
> > <babysealclub@> wrote:
> > >
> > > Correct me if I'm wrong, but is this the right Lumex LED?  It looks 
> > > like the $9.00 price is for 10.  I used the part number from the 
> > > posted BOM.
> > > 
> > > Digi-Key Part Number 67-1157-ND Price Break Unit Price Extended Price 
> > > 1 1.13000 1.13 
> > > 10 0.90000 9.00 
> > > 50 0.78760 39.38 
> > > 250 0.67500 168.75 
> > > 1,000 0.58500 585.00 
> > >  
> > > Quantity Available 1,810 
> > > Manufacturer Lumex Opto/Components Inc 
> > > Manufacturer Part Number SSI-LXH387YD 
> > > Description LED 4.9MM FLAT TOP YEL PANEL MNT 
> > > Lead Free Status / RoHS Status Lead free / RoHS compliant 
> > > All prices are in US dollars. 
> > > 
> > > Todd
> > > 
> > > 
> > > 
> > > 
> > > --- In ModularSynthPanels@yahoogroups.com, "Steve" <steve@> wrote:
> > > >
> > > > Forgive me if any of this is redundant or already answered.
> > > > 
> > > > I'm looking to complete the front panel BOM for the Thomas White
> > > > Rotary Klee MOTM panel soon in production by BrideChamber.
> > > > 
> > > > After some quick emails with Thomas, I put together a PRELIMINARY 
> > > BOM.
> > > > 
> > > > His rotary design and the BOM is in the KleeRotary folder I just
> > > > created here in the Files area.
> > > > 
> > > > There are a few parts that I need help on- namely some of the 
> > > toggles,
> > > > and confirmation of whether the knobs should be the large MOTM size 
> > > or
> > > > the small ones. They are highlighted in yellow.
> > > > 
> > > > I'm also going to probably substitute the $9 Lumex panel LEDs with a
> > > > $.09 LED panel mount and a T1 standard LED to save about $175 on the
> > > > build. Suggestions for proper T1 LEDs are welcome.
> > > > 
> > > > Thomas- if you see this and find any of this content objectionable 
> > > let
> > > > me know and I'll remove it.
> > > > 
> > > > Please let me know if you have any suggestions for the BOM so that I
> > > > can complete it.
> > > > 
> > > > Thanks in advance,
> > > > 
> > > > Steve from Modularland.com
> > > >
> > >
> >
>