Modular Synth Panels

I can't seem to see the file. My browser says it's a Flash object.

--- In ModularSynthPanels@yahoogroups.com, Richard Brewster
<pugix@...> wrote:
>
> This is a 1U panel for four passive devices:  1 potentiometer 
> (Resistor), 1 Capacitor (1 of 11 values, selected by a rotary
switch), 1 
> Vactrol, and 1 Diode.  Note that all three terminals of the pot are 
> available, with the BOTTOM terminal normalized to ground.  This allows 
> it to be used as a 2-terminal rheostat, as for example in a low-pass 
> filter configuration with the capacitor.  (Signal into Wiper, with 
> Bottom tied to one end of Capacitor through a multiple which provides 
> the output.)  Both ends of Capacitor are normally connected to ground.  
> Each of the four devices can be used independently.  And they can be 
> patched together to make various high and low-pass filters.  The
Vactrol 
> provides a voltage-controlled resistor.  (I am thinking to add a 470
ohm 
> series resistor to the Vactrol LED to limit current.)  I had room for 
> two more jacks, so I included a Diode.
> 
> I think I will make one of these and try it out.  Unfortunately the FPD 
> panel costs $60 US!
> 
> -Richard Brewster
> http://www.pugix.com
> 
> ModularSynthPanels@yahoogroups.com wrote:
> > Hello,
> >
> > This email message is a notification to let you know that
> > a file has been uploaded to the Files area of the ModularSynthPanels 
> > group.
> >
> >   File        : /Richard Brewster Designs/passives.fpd 
> >   Uploaded by : pugix <pugix@...> 
> >   Description : 1U with passive pot, capacitor, vactrol and diode 
> >
> > You can access this file at the URL:
> >
http://groups.yahoo.com/group/ModularSynthPanels/files/Richard%20Brewster%20Designs/passives.fpd

> >
> > To learn more about file sharing for your group, please visit:
> >
http://help.yahoo.com/l/us/yahoo/groups/original/members/web/index.htmlfiles
> >
> > Regards,
> >
> > pugix <pugix@...>
> >  
> >
> >
>