Modular Synth Panels

Don't forget the HPGL tick marks templates Dave Brown uploaded to the 
files section:

http://launch.groups.yahoo.com/group/ModularSynthPanels/files/DJB%20designs/

The files are named 1U HPGL.fpd and 2U HPGL.fpd.

These are really nice.  I may use these templates if I make more DIY panels.

Richard Brewster
http://www.pugix.com

Scott Juskiw wrote:
> Hi gang, I'm weighing my options on getting panels made for my own 
> DIY designs and am looking for suggestions from the group. I 
> currently have these designs that need panels:
>
> Sword of Kahless (ribbon controller) 3U
> Dunsel (utility) 1U
> Lag Processor 1U
> Minimax 1U
> Switching Comparator 1U
> Trigger Extractor 1U
> Gate Delay 1U
>
> I had hoped that Stooge panels would return one day, but that's 
> looking less likely. I'm aware of Schaeffer and Front Panel Designer 
> (although I've never used them), but have never bought into it 
> because the panels aren't the same as the official MOTM: different 
> paint texture and engraved as opposed to silk screened. Also, I've 
> heard it can get quite expensive once you start adding all the tick 
> marks.
>
> I was looking at this site:
>
> http://www.guitarfool.com/Silkscreen.html
>
> and was thinking "that doesn't look too difficult". I can buy blanks 
> from Paul S. in 1U and 2U widths, which I assume will be the same 
> paint job as all other MOTM panels. It's only those pesky 3U wide 
> panels that still have me stumped.
>
> Am I crazy to consider going this route to silk screen my own panels? 
> And where can I get 3U wide panels that have the same paint as 
> official MOTM? Or should I just give in and go the Shaeffer route? 
> Are there some other options I should look into?
>
>
>
>
>
>  
> Yahoo! Groups Links
>
>
>
>  
>
>
>
>
>