Modular Synth Panels

Hello again group,

Sorry to keep hassling you that aren't interested in this. I meet w/ my web guy tomorrow 
and hopefully go live w/ the site this weekend. Meanwhile...

There are five silkscreens ready, listed below. 1U are $20, 2U are $25 and 3U are $30. 
Please keep in mind that these panels are about 1/64" too small, and you may need to file 
the mounting holes a tiny bit if using rails! I'll supply mounting screws to atone for this 
hassle :)

1U Optic CV Processor: uses CGS mixer board. Schematic to be on site soon. Mixer is 
wired as three reversible attenuators. Optic cell goes on top (use an LED bezel for 
mounting). Controls are +/-Offset, +/-CV1/optic, +/-CV 2. Jacks are CV1 (normalled to 
optic cell), CV2, CV3 (unattenuated, usually for 1v/oct), Output.

2U Cynare: includes switches for each filter response, and two optic cells selectable via 
switch: 1/off/2. These affect the 'shimmer'.

2U Utility LFOs

2U BiNTic Filter: uses a modified Mixer, or Tellun's MUUB-2 PCB, to get square and saw 
waves from the oscillator. No linear FM. I may do a BiNTic Expander on the next run, which 
will include linear FM, PWM on the VCO, and VC Res using my VR Resistor PCB.

3U Wave Multipliers: includes a ring mod, unspecified -- a 4030 MS-20 style on the proto 
section of the PCB? A passive real one from Ken Stone? You choose. 

So there you go. Readymades will be ready once they're all tested, in stock, photo'd, and 
sound sampled -- a week or two. Kits shortly after.

Cheers,
Scott