Modular Synth Panels

No Problem, Jim. Sorry the instructions aren't clear enough.

The connections are as follows:
FM Pot: Exp FM jack signal lug, 1v/oct CV input on PCB, ground
Excite Pot: Center lug of rotary switch, signal input on PCB, ground
Excite Jack: to pin 1 of rotary switch.
pins 2-5 of rotary switch go to sequential outputs of the divided 
oscillator, as per Ken's site

This is a lack I've had -- proper instructions for the newbie. I need 
to post that on my site along with lots of other stuff. Compared to 
MOTM and Blacet, this is not easy stuff. The PCBs were not made with 
this format in mind, and they are modified. Again, that's something 
that should clearly be on the site, and I'll do that.

Please feel free to ask me ANY other questions, but off list would be 
OK too :)
We'll get your Bintic going -- it's a great filter!

Scott Deyo
The Bridechamber
contact@...
www.bridechamber.com


On Feb 20, 2007, at 11:25 PM, James Elliott wrote:

> HELP!
>
> Can someone please provide me DETAILED instructions on how to wire up 
> the following components on the Bridechamber implementation of the CGS 
> Bi'N'Tic??
>
> -FM Pot
> -Excite Pot
> -Excite Jack
>
> I'm sure that this is pretty self explanatory to the veteran DIY'ers 
> with a little EE experience, however I'm a newbie that only knows how 
> to follow instructions.... And there are no instructions on how to 
> wire those components.
>
> And please, when providing instructions please identify each 
> connection on each pot as you were describing it by looking at it from 
> the back with all of the connections pointing down - left, center, and 
> right.
>
> Thanks,
> -Jim
>
>
> Everyone is raving about the all-new Yahoo! Mail beta.
>
>  
>