Modular Synth Panels

Hello Group!

I made a new folder of silkscreen designs for your perusal and comments. They are in 
Illustrator, so your Acrobat Reader should open them. If not, let me know. 
For the most part, holes are not shown, but you can imagine where they'd be in most 
cases.

Comments:
Analog Computer: 32 jacks of logic fun. The clock for the divider is shared w/ the ASR.

Bandpass Filterbank: 6 bandpass filters. Each output's switched jack goes to a mixer, 
whose output is connected to output 6. Each input is normalled to the next, so for 
"normal" filterbank use, you'd plug your input into jack one and take your output from jack 
six. 

VCO: Note there is now a Staircase Input, for use w/ SubOsc or whatever. It has not been 
tested and may need input conditioning.

CV Cluster: Pimp, no?

Gated Comparator: The Bit Disable is below where switches are, at the bottom of those 
vertical lines. Adds the offset switch, as per Ken's suggestion, and some attenuators.

Infinite/ Diatonic: A hybrid of MOTM and Tellun Small Pot spacing...

Master Divider: with clock through at the bottom. LED holes not shown.

Modulo Magic: Yup.

Saw PS: Includes the suggested output mixer, which can be used by itself. Up and Down PS 
are normalled to Inputs 3 and 4. 

SubOsc: This is not an easy build; I call it "spaghetti behind the scenes." A and B can be 
used separately, as well as muliplications/ additions via Mix Out, if A and B are taken out 
via the switches. 

ASM/ WRS: I don't know if I really understand this module, but here's a panel for it : )

Cheers,
Scott