Modular Synth Panels

Pulse Divider and Boolean Logic (not VC Divider; I'll come out w/ that 
later, another sweet module)
ASR
Gate Converter (which has the two comparators)
NOR/ XNOR

Cheers,
Scott Deyo
The Bridechamber
contact@...
www.bridechamber.com


On Nov 7, 2007, at 9:30 AM, James Elliott wrote:

> Scott, quick question.
>
> What CGS PCBs are needed for the analog computer?
> I think I see the Analog Shift Register and the VC Divider - however 
> I'm confused as to what the other 4 sections are.
>
> Thanks,
> Jim
>
> ----- Original Message ----
> From: Scott Deyo <contact@...>
> To: ModularSynthPanels@yahoogroups.com
> Sent: Wednesday, November 7, 2007 10:21:08 AM
> Subject: Re: [ModularSynthPanels] proposed designs
>
>  I'm working on the panel. I was trying to figure out how to fit
> everything on, and still have the rotary switch PCB-mounted, but I
> don't think it's possible -- not enough clearance, and the board is
> wider than 1U anyway.
>
> A great module -- so many uses!
>
> Cheers,
> Scott Deyo
> The Bridechamber
> contact@...
> www.bridechamber.com
>
>
> On Nov 7, 2007, at 12:25 AM, James Elliott wrote:
>
> > I just now have had the opportunity to go over your synth panel
> > proposals. Some are a little funky, but who cares? I like them - I
> > know I'll be buying several (over time), if released: VCO, Analog
> > Comp, CV Cluster, infinite diatonic, sub osc.
> >
> > I'm really excited about the CGS VCO!
> >
> > Question... Scott, you have a  partial parts kit for the burst
> > generator, are you planning on creating a panel for it?
> >
> > ----- Original Message ----
> > From: Scott Deyo <contact@...>
> > To: ModularSynthPanels@yahoogroups.com
> > Sent:  Sunday, October 28, 2007 10:27:49 AM
> > Subject: [ModularSynthPanels] proposed designs
> >
> >
> > Hello Group!
> >
> >  I made a new folder of silkscreen designs for your perusal and
> > comments. They are in
> >  Illustrator, so your Acrobat Reader should open them. If not, let me
> > know.
> >  For the most part, holes are not shown, but you can imagine where
> > they'd be in most
> >  cases.
> >
> >  Comments:
> >  Analog Computer: 32 jacks of logic fun. The clock for the divider is
> > shared w/ the ASR.
> >
> >  Bandpass Filterbank: 6 bandpass filters. Each output's switched jack
> > goes to a mixer,
> >  whose output is connected to output 6. Each input is normalled to  
> the
> > next, so for
> >  "normal" filterbank use, you'd plug your input into jack one and  
> take
> > your output from jack
> >  six.
> >
> >  VCO: Note there is now a Staircase Input, for use w/ SubOsc or
> > whatever. It has not been
> >  tested and may need input conditioning.
> >
> >  CV Cluster: Pimp, no?
> >
> >  Gated Comparator: The Bit Disable is below where switches are, at  
> the
> > bottom of those
> >  vertical lines. Adds the offset switch, as per Ken's suggestion, and
> > some attenuators.
> >
> >  Infinite/ Diatonic: A hybrid of MOTM and Tellun Small Pot spacing...
> >
> >  Master Divider: with clock through at the bottom. LED holes not  
> shown.
> >
> >  Modulo Magic: Yup.
> >
> >  Saw PS: Includes the suggested output mixer, which can be used by
> > itself. Up and Down PS
> >  are normalled to Inputs 3 and 4.
> >
> >  SubOsc: This is not an easy build; I call it "spaghetti behind the
> > scenes." A and B can be
> >  used separately, as well as muliplications/ additions via Mix Out,  
> if
> > A and B are taken out
> >  via the switches.
> >
> >  ASM/ WRS: I don't know if I really understand this module, but  
> here's
> > a panel for it : )
> >
> >  Cheers,
> >  Scott
> >
> >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam? Yahoo! Mail has the best spam protection around
> > http://mail.yahoo.com
> >
> > 
> >   
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
>  
>