PLAN B analog blog

I was commenting on M29, which might benefit from active circuitry a 
la Syntesizers.com Q147 Distributor. (BTW, I have a M14 already)

Best regards
Jari Jokinen 

--- In PLAN_B_analog_blog@yahoogroups.com, "(i think you can figure 
that out)" <peter@...> wrote:
>
> Jari,
> 
> If you're willing to pay more, then think about getting a Model 14
> instead because it can do everything you've mentioned here :)
> 
> It would require a completely different circuit to do this with a 
M9.
>  Secondly, I feel having an automatic DC applied to the NC contacts 
a
> questionable modification on an audio mixer because it would offset
> your AC's symmetry (raise or lower it away from center). I'm not 
sure you want this.
> 
> Again, think about a Model 14 - I think this is what you're needing!
> 
> - P
> 
> 
> 
> --- In PLAN_B_analog_blog@yahoogroups.com, "jalmari3"
> <jari.jokinen@> wrote:
> >
> > I would gladly pay extra for an active version with bipolar 
attenuators
> > and voltage source capability (when no signal is inserted). Like
> > Syntesizers.com Q147 Distributor:
> > http://www.synthesizers.com/q147.html
> >
> > Best regards
> > Jari Jokinen
> >
> > --- In PLAN_B_analog_blog@yahoogroups.com, "(i think you can 
figure
> > that out)" <peter@> wrote:
> > > 2)  The third in our utility module series, the Model 29 
Dynamic Mult
> > > is a unique 1-to-5 signal splitter in which four of the outputs 
are
> > > equipped with manual level pots, allowing for both contour 
control and
> > > signal distribution. The perfect companion for non-attenuated VC
> > > inputs, the Model 29 requires no power supply connection to 
operate as
> > > it takes it's ground reference from the cables patched into it.
> > >
> > > go here for more details:
> > >
> > > http://www.ear-group.net/model_29.html
> > >
> >
>