Yahoo Groups archive

PLAN B analog blog

Index last updated: 2026-04-28 23:10 UTC

Message

RE: [PLAN_B_analog_blog] Model 15 getting interference from other modules

2008-02-04 by Anthony Rolando

Have you tried moving the Oscillator (or the 28 and Dalek) to different rows? Additionally, try inserting the Model 15 at the very center most power supply connection (where the supply feeds the distro board) and insert the Model 28 and Dalek at the end of the power distro board (toward the edges of the case.

Tony

> To: PLAN_B_analog_blog@yahoogroups.com
> From: deastman2@yahoo.com
> Date: Mon, 4 Feb 2008 07:10:57 +0000
> Subject: [PLAN_B_analog_blog] Model 15 getting interference from other modules
>
> I have a Model 15 which is picking up some interference/unwanted
> modulation from two of its neighboring modules: a Model 28 and a Dalek
> Modulator. When the Model 28 is running, I can hear its pulses coming
> through the Model 15 output. The Dalek is causing the same problem,
> mainly when one or both oscillators are in the 'low' range. All three
> modules are in an older Doepfer enclosure with an NT12 PSU. Any
> suggestions?
>
>
>
>
> Yahoo! Groups Links
>
> <*> To visit your group on the web, go to:
> http://groups.yahoo.com/group/PLAN_B_analog_blog/
>
> <*> Your email settings:
> Individual Email | Traditional
>
> <*> To change settings online go to:
> http://groups.yahoo.com/group/PLAN_B_analog_blog/join
> (Yahoo! ID required)
>
> <*> To change settings via email:
> mailto:PLAN_B_analog_blog-digest@yahoogroups.com
> mailto:PLAN_B_analog_blog-fullfeatured@yahoogroups.com
>
> <*> To unsubscribe from this group, send an email to:
> PLAN_B_analog_blog-unsubscribe@yahoogroups.com
>
> <*> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>

Connect and share in new ways with Windows Live. Get it now!

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.