QTR-Quadtone RIP

> DEFAULT_INK_LIMIT=0

This should be 1, I think.

--John


On 28 Mar 2012, at 12:49 PM, tboleyyh wrote:

> Illegal division by zero at /Library/Printers/QTR/bin/quadprofile line 205
> 
> is the terminal alert I'm getting, for a 1900 profile install. I'm just getting one odd problem after another... if anyone has a clue, and cares top look, I've pasted in the text file below.. 
> any errors you see would be appreciated... thanks
> Tyler
> 
> 
> #  QuadToneRIP curve descriptor file
> #
> #  for R800 with ultrachrome inks
> 
> CALIBRATION=NO
> GRAPH_CURVE=NO
> 
> #
> # number of inks must be 4, 6, or 7
> # the ink limits are percentages
> #   usually they are all the same but they can be individually set
> #
> N_OF_INKS=8
> DEFAULT_INK_LIMIT=0
> 
> LIMIT_
> PK=100
> BOOST_K=100
> LIMIT_C=
> LIMIT_M=
> LIMIT_Y=
> LIMIT_GL=
> 
> #
> #  Describe Usage of each Ink: MK,C,M,Y,R,OR,LK,GL
> #    All Inks of Printer must be listed
> #
> 
> #
> # Gray Partitioning Information
> #
> N_OF_GRAY_PARTS=4
> GRAY_INK_1=PK
> GRAY_VAL_1=100
> 
> GRAY_INK_2=C
> GRAY_VAL_2=25
> 
> GRAY_INK_3=M
> GRAY_VAL_3=7.75
> 
> GRAY_INK_4=Y
> GRAY_VAL_4=2.33
> 
> GRAY_INK_5=
> GRAY_VAL_5=
> 
> GRAY_INK_6=
> GRAY_VAL_6=
> 
> GRAY_INK_7=
> GRAY_VAL_7=
> 
> GRAY_HIGHLIGHT=6
> GRAY_SHADOW=8
> 
> GRAY_GAMMA=1
> GRAY_CURVE=
> 
> #
> # Toner Partition Information
> #
> N_OF_TONER_PARTS=0
> TONER_INK_1=
> TONER_VAL_1=
> TONER_INK_2=
> TONER_VAL_2=
> 
> TONER_HIGHLIGHT=6
> TONER_SHADOW=8
> 
> TONER_GAMMA=1
> TONER_CURVE=
> 
> #
> # Toner 2 Partition Information
> #
> N_OF_TONER_2_PARTS=0
> TONER_2_INK_1=
> TONER_2_VAL_1=
> TONER_2_INK_2=
> TONER_2_VAL_2=
> 
> TONER_2_HIGHLIGHT=6
> TONER_2_SHADOW=8
> 
> TONER_2_GAMMA=1
> TONER_2_CURVE=
> 
> #
> # Unused Inks
> #
> N_OF_UNUSED=4
> UNUSED_INK_1=MK
> UNUSED_INK_2=R
> UNUSED_INK_3=OR
> UNUSED_INK_4=GL
> UNUSED_INK_5=
> 
> 
> 
> 
> ------------------------------------
> 
> Yahoo! Groups Links
> 
> 
>