QTR-Quadtone RIP

Parker Smith <parkersmithphoto@...> wrote:

> **
>
>
> Paul,
> For the R2400, I used your existing EbHP13-EpsHPn-HighY profile and
> added the C and LC as copy curves, splitting the ink limits in half
> between the two similar inks. After printing the 21 step test, I used a
> Spyder to read the following values:
> 0.000.040.100.170.230.320.410.480.550.630.700.780.850.941.011.081.181.27\
> 1.371.441.62
> Adding these to the linearization panel and printing the new profile
> with some circular test targets shows that it's very good, but not quite
> perfect.If I wanted to re-relinearize, would I leave these numbers in,
> print a new test strip, read those numbers and then replace the existing
> numbers?
>
Print the profile with the Linearization tab totally cleared.  Then use the
resulting numbers to plug into the boxes.

Paul
www.PaulRoark.com


[Non-text portions of this message have been removed]