Message
Re: Curve in GRAY_CURVE has no effect?
2014-03-13 by <luciano@...>
I use QTR on a Mac, and my CS6 is on the Mac. This is where I generate my curves (acv).
I am using my PC to check the curve with Curve Creator.
I created a curve on the Mac, copied it on the PC and modified the profile (here in my first post) to insert it in CURVE_K (the data are the same as those in the post here with the addition of the Kadj_1.acv from Mike).
When I try to display the curve I get the error: "C:\Program Files\QuadToneRIP\bin\test2.acv did not return valid coordinates at quadprofile.pl line 41"
From a command popmpt I executed the command "qacv test2.acv curvenum". The command displays: "0,0 100,100". Obviously there are a lot more points in the curve.
If I run the same command with one of Mike's curves, I have no problem.
So on CS6 on the Mac I made a small change in the Kadj_CC1a.acv curve from Mike (change one point from 30 to 31, so nothing drastic), saved it a test.acv, copied it to the PC, added to my K curve and got the same error.
So it looks like Curve Creator cannot read curves created on the Mac?
Any advice?