QTR-Quadtone RIP

Nemo, the application you want to use is "MeasureTool" located within the ProfileMaker 
folder.  Your eye-one must be hooked up.  Once you have the spectro hooked up, go to 
the Tools menu, select "Instrument Configuration," Reflection and I guess the Port would 
be Auto.  After that, make sure it says OK at the bottom of the Instrument Configuration 
window.  After that, you should be good to load the chart and do your measurements.

Ed


--- In QuadtoneRIP@yahoogroups.com, "nemoniemann" <nemophoto@e...> wrote:
>
> I've read the accompanying PDF's over and over, and I can't seem to
> make sense of them. This may be because it says the demo versions of
> ProfileMaker will allow me to make and measure charts to create your
> own linearization files. However, MY demo version of the program won't
> load the testchart data reference files (i.e. - QTR-51-random.txt) --
> I get "Illegal color data type" -- and "Measuring - Chart" is grayed out.
> 
> Any suggestions for where I can find information regarding creating my
> own QTR profiles with an EyeOne spectrophotometer?
> 
> I have an Epson 7000 loaded with the "original" ICC Piezography quad
> inks -- not the K6 inks. 
> 
> Thanks,
> 
> Nemo
>