QTR-Quadtone RIP

--- In QuadtoneRIP@yahoogroups.com, Roy Harrington <roy@...> wrote:
>
> Looks like I got the max paper size wrong on that printer.
> The 1290 is identical except for the width so using the Printer 
Model
> should work just fine -- just don't use the extra width.
> 
> Let me know if you have any trouble doing this.
> 
> Roy
> 
> On Sunday, February 5, 2006, at 01:49  PM, bty10195285 wrote:
> 
> > Is there a way to make Quadtone recognize A4 paper when using 
Epson
> > 890.Custom setting will not let me set correct paper dimension 
with
> > result that print is not centralized.Tried roll paper setting 
which
> > did centralize once but trailed of printing before print was
> > finished.I know that Quadtone will not let you set paper size 
larger
> > than the printer can handle but the 890 can handle A4--as 
available in
> > printer driver.Help required---ink & paper consumption is 
getting out
> > of hand! Are the 1290 curves the same as the 890? If I set the
> > printing model to 1290 will it work? Having finally found a RIP 
that
> > works this minor hiccup is a pain in the ****.Any help much
> > appreciated.
> >
> -
> Roy Harrington
> roy@...
> Black & White Photo Gallery
> http://www.harrington.com
>
Thanks Roy--1290 setting seems to work fine.Advice appreciated.Pete.