QTR-Quadtone RIP

I got banding when I linearized using the 51step target while the 21step
worked fine. I'm using an X-Rite 810 with a 2100. Seems like more steps is
not neccessarily a good thing.

--
Daniel Staver
http://daniel.staver.no 

> I've built a new curve for the R2400, I tried linearizing by 
> measuring every other step on the 100 step target.  Get 
> banding/steps in a smooth gradient after doing this.  If I 
> linearize on the 21 step
> target things seem ok.  Using a XRite-810.   Can I linearize using
> more than 21 steps?