QTR-Quadtone RIP

Ok,

That can be fixed. Maybe it can get into the next release of QTR. 


-Stephen
 www.sbillard.org/Stephen

-----Original Message-----
From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] On Behalf
Of Mike Dawson
Sent: Saturday, February 03, 2007 6:08 PM
To: QuadtoneRIP@yahoogroups.com
Subject: [QuadtoneRIP] Re: QTRgui - Forced landscape rotation

Again, thanks for the fast reply.

I just did some testing.  This is repeatable every time.  If Auto- Orient is
checked in the options menu then the image will auto-rotate every time when the
"Print" button pressed.  So if the image rotates on load and then I override the
orientation selected by QTRgui, QTRgui will then auto-orient the image again
when Print is pressed.

Whether you consider this a bug or not I don't know.  But as long as I know how
it operates I can deal with it.

Mike

--- In QuadtoneRIP@yahoogroups.com, "Stephen Billard" <stephen@...>
wrote:
>
> The auto rotation happens only when the picture is loaded or the
AutoOrient
> option is checked.
> 
> Other things that could (somehow) be happening:
> 
> The Portrait/Landscape radio box is getting clicked.
> The picture is dragged and dropped without your noticing.
> 
> There is NO orientation done at printing time. AutoOrient would
never rotate the
> picture to the wrong aspect.
> 
> -Stephen
>  www.sbillard.org/Stephen
> 
> -----Original Message-----
> From: QuadtoneRIP@yahoogroups.com
[mailto:QuadtoneRIP@yahoogroups.com] On Behalf
> Of Mike Dawson
> Sent: Saturday, February 03, 2007 5:11 PM
> To: QuadtoneRIP@yahoogroups.com
> Subject: [QuadtoneRIP] Re: QTRgui - Forced landscape rotation
> 
> Stephen,
> 
> Thanks for the reply.  It sounds like you're saying that you don't
know why
> QTRgui would start doing this.  I know about the auto-rotate option
(which I
> usually have selected).  This was definitely not happening when I
loaded the
> image.  It was happening when I pressed the "Print" button.
> 
> Let me ask you this.  The one picture I was trying to print was
square but
> perhaps 0.1" inch wider than taller.  The other image that did this
was the ink
> separation calibration image, which is wider than taller.  The
calibration page
> would load in landscape orientation as expected.  I would then
change the
> orientation to portrait.
> 
> Do you think this could be the issue?  You say auto-rotation is not
supposed to
> happen at print time.  But maybe that is what is actually
happening???
> 
> Mike
>




 
Yahoo! Groups Links