QTR-Quadtone RIP

Hi did you ever get this fixed? I just installed K7 on an Epson 7600 - printing on HPR.. I 
am seeing very pronounced  bleeding of the greater than 95% blocks!!

--- In QuadtoneRIP@yahoogroups.com, "a_hammerbacher" <hammerbacher@...> wrote:
>
> Hi,
> 
> I bougth a set of Piezography Neutral K7  inks for the Epson R2400 and
> a tried to print with the QTR.
> I've choosen Hahnemuehle Photorag (bought in Germany) and the QTR
> Settings as follows.
> 
> Printer: Epson R2400
> Printer Type: QuadR2400-K7
> Media Source: Manual Roll
> Media Type: Matte
> Resulution:2880 and 1440 (I tried both, with almost the same result)
> Speed: Better
> Dither:Ordered
> Curve: K7-2880-HanPhotorag and K7-2880-HanPhotorag (Tried both with
> the same results)
> Ink Limit: 0
> Gamma: 0
> 
> 
> The result where poor, because the ink is bleeding on edges between
> dark and light areas. I've checked the paper in the printer, but the
> coated side was in the correct position. I have no glue, where this
> "bleeding" comes from and how I can get rid of it. For me, It looks
> like, that the printer/QTR puts much to much ink on the paper, because
> the paper is totally soaked with ink and gets undulated. I also
> reduced the Ink Limit to -15 with only minor changes in the result. 
> 
> Does anybody know, how to solve this problem?
> Are there differences in the Hahnemuehle Paper between the US and
> Germany which can affect the QTR-Profiles?
> 
> 
> thanks and regards
> Andreas
>