Ink separation query
2016-01-13 by bluesaltphotography@...
Sorry if this has been asked but can t find the answer. Printing on p800 with print tool on Mac. Is it necessary to do ink separation test on each type of
Messages
Browse messages
Page 56 of 318 · 15852 messages matched
Re: Print Tool and icc profiles
2016-01-13 by richard@...
Sandy, Sorry for such a long delay in response. I ve been a little busy for the last few weeks with family around the holidays and then catch up work. I just
Re: New QuadToneRIP version 2.7.6 for Mac and PC
2016-01-12 by mike.finley@...
If you re looking at the version number in QTRgui that will show 2.7.0 - QTRgui has not been updated for a long time now.
Happy 2016 QTRers, introductions
2016-01-12 by Walker Blackwell
Hello fine people. This is Walker Blackwell. I haven t posted on here in a long while but I m emailing today to let you know that I ve been hired by the
Re: New QuadToneRIP version 2.7.6 for Mac and PC
2016-01-11 by stephen.malshuk@...
This last week I attempted to update the QTR program from the 2.7.0 version to the .6 version on my PC. I did the download, the hit Run. After the process was
Re: [QuadtoneRIP] QTR Lineraize Quad on Mac
2016-01-09 by Roy Harrington
Didn t really understand what you wanted to do at first. But to install the new curve, either re-run the Install..printer.command script again or run the
Re: QTR Lineraize Quad on Mac
2016-01-08 by brian_downunda@...
On Windows, yes, it s a snap. Just copy the -lin file into the applicable folder, although you d probably need to do so as Administrator. Alternatively use
QTR Lineraize Quad on Mac
2016-01-08 by bruce_pickering@...
Last night I tried this new applet with my existing quad file and my new curve readings and it created a new quad file with the same name as the old with the
P800/QRT issues??
2016-01-06 by al.benas@...
Version for PC/QuadToPrinter file 2.7.6.0 (Long, meaningless intro) Just replaced my 3880 (which replaced a dead 4900) with the P800 the first of December. I
QTR turning off split tone settings
2016-01-06 by david@...
QTR has the hiccups, I guess. I was running test prints and suddenly QTR decided to turn off the split tone settings I input, despite my hitting Save after
Re: QTR feeds too much roll paper
2016-01-05 by ozwille@...
David, thanks for the reply. I traced the problem to custom paper sizes I created for the roll media I ve been using. QTR seems to have problems with
Re: R1800 and Digital negative curves for epson inks and PICTORICO OHP premium
2016-01-03 by clay@...
I have built digital negative curves for palladium printing for the R3000 using the UC inks. They work well. You are welcome to use any of these as starting
R1800 and Digital negative curves for epson inks and PICTORICO OHP premium
2016-01-03 by xian@...
hi all, are there basic curves for printing DN on OHP sheets for the UC standard epson R1800 inks? or should i just move on to piezo inks? best
Re: ink set calibration for various printers
2015-12-30 by xian@...
yes u right. its the asian model numbering adds the 5.. found that out eventually. thanks for the lead..
Re: installing curves in .text format
2015-12-30 by xian@...
Hmmm thanks for all the suggestions guys
Re: [QuadtoneRIP] Eboni 6 + Epson 3880: Clogged Channels a regular issue ?
2015-12-29 by kenlee333@...
Thank you for sharing that link. Because I am not a customer of Inkjet Mall, I can t create an account on that forum. While I can read the messages I can t
Re: [QuadtoneRIP] Eboni 6 + Epson 3880: Clogged Channels a regular issue ?
2015-12-29 by kenlee333@...
Thanks - I am using carts purchased from inkjetcarts.us, same as those sold by inkrepublic.com. They are nice: they hold 120ml each. I think the problem is
Re: [QuadtoneRIP] Eboni 6 + Epson 3880: Clogged Channels a regular issue ?
2015-12-29 by kenlee333@...
Up to now I have used the 6 Eboni inks purchased from MIS. I have made my own QTR profiles using 6 channels: Black, Cyan, Magenta, Yellow, Light Cyan and Light
Re: [QuadtoneRIP] Eboni 6 + Epson 3880: Clogged Channels a regular issue ?
2015-12-29 by kellyhealy@...
Have you checked to make sure the priming port plug is present on the right side of the cart (looking from the back) ? The plug is in a recess on the side
Re: [QuadtoneRIP] Eboni 6 + Epson 3880: Clogged Channels a regular issue ?
2015-12-29 by Paul Roark
... I had the whole supply system replaced a few months ago. I can t imagine the damper is clogged. Note, again, that the LLK uses the same ink as the LM in
Re: [QuadtoneRIP] Eboni 6 + Epson 3880: Clogged Channels a regular issue ?
2015-12-29 by Keith Schreiber
Here is the link: http://www.inkjetmall.com/tech/showthread.php?228-3800-LC-channel-completely-missing/page2
Re: [QuadtoneRIP] Eboni 6 + Epson 3880: Clogged Channels a regular issue ?
2015-12-29 by kenlee333@...
If you can find the link that would be helpful. I had the whole supply system replaced a few months ago. That s what bothers me about this whole approach.
Re: [QuadtoneRIP] Eboni 6 + Epson 3880: Clogged Channels a regular issue ?
2015-12-29 by Paul Roark
If the LM cart is good and replacing the damper, as Keith noted can be done, does not work, keep in mind that the 6% ink in the LM position is repeated in the
Re: New i1 Profiler Workflow for QTR Step-Wedges
2015-12-29 by Norman Christie
Richard, An excellent article. Could these charts be adapted for Datacolor SpyderPrint(?) and if so, what would be needed. Regards, Norman Christie
Re: [QuadtoneRIP] Eboni 6 + Epson 3880: Clogged Channels a regular issue ?
2015-12-29 by Myron Gochnauer
I have used a 3880 with OEM inks for three or four years, but not heavily. Occasionally it will sit, turned off, for a month or more. I’ve never had a
Re: [QuadtoneRIP] Eboni 6 + Epson 3880: Clogged Channels a regular issue ?
2015-12-29 by kenlee333@...
The 1404 issue has been resolved: the little O-rings in a cartridge had come off when I was refilling it, making a seal impossible. With the O-ring restored,
Re: [QuadtoneRIP] Eboni 6 + Epson 3880: Clogged Channels a regular issue ?
2015-12-29 by kenlee333@...
Your theory is proving correct: I put some ink into the (previously unused) LK cartridge, and the printer then started making a noise for a minute or so and
Re: [QuadtoneRIP] Eboni 6 + Epson 3880: Clogged Channels a regular issue ?
2015-12-29 by Keith Schreiber
Ken, If there is nothing at all coming through a channel, then there is a good chance that the damper is clogged. I had that problem on a 3800 2 or 3 years
Re: [QuadtoneRIP] Eboni 6 + Epson 3880: Clogged Channels a regular issue ?
2015-12-29 by Paul Roark
I used Jon Cone s. MIS sent a beta set later, but I did not have a chance to test it. They appear to be the same. I initially tried to re-use OEM carts,
Re: [QuadtoneRIP] Eboni 6 + Epson 3880: Clogged Channels a regular issue ?
2015-12-29 by kenlee333@...
I think the problem is with the printer. The cart seems fine, the printer doesn t complain about the ink level - or anything for that matter. It s only when I
Re: [QuadtoneRIP] Print Tool and El Capitan
2015-12-29 by Myron Gochnauer
Is the current version of Print Tool compatible with El Capitan? I’ve been using with with El Capitan since the summer. No problems to report. Myron Is the
Re: [QuadtoneRIP] Eboni 6 + Epson 3880: Clogged Channels a regular issue ?
2015-12-29 by kenlee333@...
Whose carts would you recommend please ? Thanks !
Print Tool and El Capitan
2015-12-28 by stats@...
Is the current version of Print Tool compatible with El Capitan? Apple is pushing me to upgrade as a possible fix to a problem I am having but want to make
Re: [QuadtoneRIP] Eboni 6 + Epson 3880: Clogged Channels a regular issue ?
2015-12-28 by Paul Roark
I used Eboni-6 in a 3880 for months with no problems at all. I mixed my own using STS WJ1082 (what MIS sells as Eboni MK) and my generic base c6b. (I buy
Re: [QuadtoneRIP] Eboni 6 + Epson 3880: Clogged Channels a regular issue ?
2015-12-28 by kenlee333@...
I am not using a continuous ink delivery system. I use 120 ml cartridges from inkjetcarts.us - the same ones available from inkrepublic.com The cartridges sit
Re: [QuadtoneRIP] Eboni 6 + Epson 3880: Clogged Channels a regular issue ?
2015-12-28 by Norm Plummer
Really an off the wall thought but it helped me on an R2400 that kept showing clogs. Be sure the ink bottles are more or less level with the printer. I had
Eboni 6 + Epson 3880: Clogged Channels a regular issue ?
2015-12-28 by kenlee333@...
A few months ago I experienced a clogged channel which did not respond to repeated cleaning cycles. Following the instructions from an online video, I tried to
Support fo El Capitan Mac OS
2015-12-27 by rhkdiver@...
Does the latest version of Quadra Tone support the latest Mac OS El Capitan, The app does not show up in my PSCC 2015 dialogue Please advise, Thanks, Rod K
installing curves in .text format
2015-12-25 by xian@...
OK I have a set of curves or pribter profiles for alt pro at .text files. How do I install them. For instance I have a profile for cyanotype on pictorico I
Re: [QuadtoneRIP] Re: Print Tool and icc profiles
2015-12-24 by Brubaker family
Thanks to everyone who has responded. These are icc profiles from Ilford for their Gallerie Classic Gloss paper. Dragging them to CurrentOS or
Re: Print Tool and icc profiles
2015-12-24 by brian_downunda@...
Eh? I don t understand. I can t find a place where greyscale ICCs aren t shown in either PS CS6 or PS CC 2015. Is this an OS X thing (I m on Windows 7)? LR
Re: Print Tool and icc profiles
2015-12-24 by sanking@...
Richard, How is your book on QTR going? Is it going to available in the next 4-6 months? We heard about it a lot, then for a few months nothing. Sandy
Re: [QuadtoneRIP] Re: Print Tool and icc profiles
2015-12-23 by Roy Harrington
I don t think anything has changed significantly in El Capitan for ICC profiles. The idea with ICC profiles is that they mostly go into --
Re: [QuadtoneRIP] Re: Print Tool and icc profiles
2015-12-23 by Norm Plummer
I know what you mean. When I downloaded some Ebvt-3880 profiles they showed up fine when I coped them into the directory. However, when I created some curves
Re: Print Tool and icc profiles
2015-12-23 by richard@...
You shouldn t need to do any command line trickery with the RGB profiles to get them to show up PS CC. I just drag them into CurrentOS or
Re: [QuadtoneRIP] Print Tool and icc profiles
2015-12-23 by Norm Plummer
Hmm - this is what I was struggling with before (see previous posts). Gray scale curves cannot be seen at all in PS 6. Roy has a good explanation in message
Re: [QuadtoneRIP] Print Tool and icc profiles
2015-12-23 by Brubaker family
Thanks Richard and Norm - Library/ColorSync/Profiles/QTR did the trick. Do either of you know where to put icc profiles in El Capitan so that PS6 sees them.
New i1 Profiler Workflow for QTR Step-Wedges
2015-12-23 by richard@...
I just finished an updated (and more complete) post for using i1 Profiler for measuring the QTR targets and using the linearize/create icc apps. This new
Re: [QuadtoneRIP] Print Tool and icc profiles
2015-12-23 by richard@...
PrintTool nicely organizes the profiles into different groups, but it doesn t seem to matter if you move them to Library/ColorSync/Profiles or to the alias to
Re: QTR feeds too much roll paper
2015-12-23 by david.whistance@...
You will need to go through your print settings very carefully - somewhere, probably on the Paper Handling tab you will find that the Mac has defaulted to a