Yahoo Groups archive

QTR-Quadtone RIP

Index last updated: 2026-04-28 23:12 UTC

Thread

User Guide discrepancy

User Guide discrepancy

2016-03-28 by Lew Schwartz

This is my first time working with QTR & The User Guide, the following seems to be a contradiction.

The guide states:

To print the first Ink Separation Test Page, place a piece of the paper for
which the Curve will be designed in the printer, make sure the calibration
slider is all the way to the left (100), click the Print button and you’re
off.

In my QTRgui, all the way to the left results in a value of 0. So which do I use?

-Lew Schwartz

Re: [QuadtoneRIP] User Guide discrepancy

2016-03-28 by Paul Roark

You want 100% on the first calibration mode print.

Paul
www.PaulRoark.com
Show quoted textHide quoted text
On Mon, Mar 28, 2016 at 2:59 PM, Lew Schwartz lew1716@... [QuadtoneRIP] <QuadtoneRIP@yahoogroups.com> wrote:

This is my first time working with QTR & The User Guide, the following seems to be a contradiction.

The guide states:

To print the first Ink Separation Test Page, place a piece of the paper for
which the Curve will be designed in the printer, make sure the calibration
slider is all the way to the left (100), click the Print button and you’re
off.

In my QTRgui, all the way to the left results in a value of 0. So which do I use?

-Lew Schwartz


Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.