P800 and QTR
2017-11-14 by bradforddunlop@...
Is anyone using the P800 with QTR and if so are you experiencing pizza wheels. If so do you have a solution?
Thanks
Brad
Thread
P800 and QTR
Re: [QuadtoneRIP] P800 and QTR
2017-11-14 by David Kachel
Use the front feed slot. The pizza wheels are raised if paper is fed through that slot. David Kachel _________________________ Artist-Photographer Fine B&W Photographs & Photogravures WEBSITE: www.davidkachel.com BLOG: thetransparentphotographer.com EMAIL: david@... PO Box 1093 Bisbee, AZ 85603 (520) 366-4181
Show quoted textHide quoted text
From: <QuadtoneRIP@yahoogroups.com> on behalf of "bradforddunlop@... [QuadtoneRIP]" <QuadtoneRIP@yahoogroups.com> Reply-To: <QuadtoneRIP@yahoogroups.com> Date: Tuesday, November 14, 2017 at 8:48 AM To: <QuadtoneRIP@yahoogroups.com> Subject: [QuadtoneRIP] P800 and QTR Is anyone using the P800 with QTR and if so are you experiencing pizza wheels. If so do you have a solution?
Re: [QuadtoneRIP] P800 and QTR
2017-11-14 by forums@walkerblackwell.com
You can do this technique that I worked up for the 3880. It’s a little different on the P800 as the printer takes a bit more time to get to the leaf sensor.
https://jkschreiber.wordpress.com/2016/08/08/how-to-disable-star-wheels-on-an-epson-3880/
-Walker
On Nov 14, 2017, at 10:48 AM, bradforddunlop@... [QuadtoneRIP] <QuadtoneRIP@yahoogroups.com> wrote:Is anyone using the P800 with QTR and if so are you experiencing pizza wheels. If so do you have a solution?
Thanks
Brad
Re: [QuadtoneRIP] P800 and QTR
2017-11-14 by bradforddunlop@...
Thanks for the suggestion. I have found that if I stick the transparency to a piece of illustration board and
use the Poster Board feed it works just fine. If it changes I will try your suggestion
Brad