QTR-Quadtone RIP

When using drop-quad you need a printer-already installed.

The best way do install new curves is take this .txt (or .qidf) file and place it inside of the curve folder. Then double click the install command.

To find that generated .quad file go to >Library>Printers>QTR>quadtone>(your printer name)

Best,
Walker



> On Aug 10, 2018, at 12:47 PM, dzopz2c25rp3l3fkbpawkghyzhy5jqutuxyw5tx5@... [QuadtoneRIP] <QuadtoneRIP@yahoogroups.com> wrote:
> 
> 
> I am very new to QTR RIP. I have been exploring this site and trying to understand the different files that come with the program. I've a written a few descriptor files and intalled them using QTR Instal. I tried dropping one of the files intoDrop-Quad profile and got the following "Could not find PPD file for P600 at /etc/cups/ppd/P600.ppd".
> 
> What does this mean? Below is the descriptor file I am using.
> 
> Would apprreciate any info.
> 
> #  QuadToneRIP curve descriptor file
> #  New test profile QTRp600_10 FOLLOWING TUTORIAL
> #  Same as 10 with boost set at 55
> #  for ultrachrome k3 inks
> 
> N_OF_INKS=8
> DEFAULT_INK_LIMIT=100
> 
> LIMIT_K=35
> BOOST_K=
> LIMIT_C=1
> LIMIT_M=1
> LIMIT_Y=15
> LIMIT_LC=1
> LIMIT_LM=0
> LIMIT_LK=50
> LIMIT_LLK=10
> 0
> #
> #  Describe usage of each ink
> #  All inks must be listed
> #
> 
> COPY_CURVE_C=K
> COPY_CURVE_M=K
> COPY_CURVE_Y=K
> COPY_CURVE_LC=K
> COPY_CURVE_LM=
> COPY_CURVE_LK=K
> COPY_CURVE_LLK=K
> 
> # Gray Partitioning Information
> 
> N_OF_GRAY_PARTS=3
> GRAY_INK_1=K
> GRAY_VAL_1=100
> 
> GRAY_INK_2=LK
> GRAY_VAL_2=40
> 
> GRAY_INK_2=LLK
> GRAY_VAL_2=5
> 
> GRAY_HIGHLIGHT=6
> GRAY_SHADOW=6
> 
> GRAY_GAMMA=0.7
> GRAY_CURVE=
> 
> 
> 
> 
> 



[Non-text portions of this message have been removed]