QTR-Quadtone RIP

Hi,

I have been trying to print on a Epson R800/QuadR800 with QTR in 
WinXP, but no luck so far. I have used both version 2.3.2 and 2.3.3 
and just about every possible setting in QTR I can think of. If I use 
one of the 1440 resolutions the sending of the data to the
spooler/printer gets stuck at some point. The 2880 dpi works better in
the sence that all the data is sent to the printer, but nothing is 
printed, the printer is not even loading the paper. If I preload the 
paper by pressing the sheet/trashcan button, it's just ejected after 
the printer has recieved all the data. Again, nothing is printed.

I have tried using both 8 and 16-bit b/w TIFFs saved in Picture Window
Pro 3.5, the 16-bit version is about 12 MB and the thumbnail shows up
fine in QTR. Ordered dithering seems to be the fastest alternative, 
it generates about 65 MB of data and takes 10-15 minutes on a Athlon 
XP 1800. The only warning in the log file is as below, QuadToPrinter
finishes without errors:

calling ReadTIFF
TIFFReadDirectory: Warning,
F:\2005\11\27\Converted\051127_1325-020-03-8bit-bw.tif: unknown field
with tag 34665 (0x8769) encountered

The green light is flashing on the printer and turns to a solid green 
after all the data is sent and the job is removed from the spooler.

I have tried direct printing, printing after the last page is spooled
and start printing immediately, no difference. I even removed KB896423
from Windows as I noticed that people have had problems with it. No 
prints.

I have gigs of free disk space and I have rebooted the server and the
printer several times.

I would appreciate if someone could point me to a b/w tiff that 
definitely prints, I could at least rule out errors in the file.

--- In QuadtoneRIP@yahoogroups.com, "teeproo" <teeproo@y...> wrote:
> I have been trying to print on a Epson R800/QuadR800 with QTR in 
> WinXP, but no luck so far. I have used both version 2.3.2 and 2.3.3 
> and just about every possible setting in QTR I can think of. If I 

OK, I figured it out, my Epson R800 is not printing anything using
QTR 2.3.2 and 2.3.3, but 2.3.1 works just fine. Anyone else have this 
problem? The 2.3.3 release notes says R800: fixed, but this is 
definitely not true in my case.

Anyway, I hope you can fix this somehow, now that I have had the
possibility to play around with QTR a bit, I really like what I'm
seeing, you are most certainly going to get my money. Thanks!

Same problem here. Went back to 2.3.1



--- In QuadtoneRIP@yahoogroups.com, "teeproo" <teeproo@y...> wrote:

>
> --- In QuadtoneRIP@yahoogroups.com, "teeproo" <teeproo@y...> wrote:
> > I have been trying to print on a Epson R800/QuadR800 with QTR in 
> > WinXP, but no luck so far. I have used both version 2.3.2 and 2.3.3 
> > and just about every possible setting in QTR I can think of. If I 
> 
> OK, I figured it out, my Epson R800 is not printing anything using
> QTR 2.3.2 and 2.3.3, but 2.3.1 works just fine. Anyone else have this 
> problem? The 2.3.3 release notes says R800: fixed, but this is 
> definitely not true in my case.
> 
> Anyway, I hope you can fix this somehow, now that I have had the
> possibility to play around with QTR a bit, I really like what I'm
> seeing, you are most certainly going to get my money. Thanks!
>

Yes, a last minute fix for something else was a problem, sorry.

So there's another new version. I think it's all good now.

QTR Version 2.3.4 Released

Roy


On Wednesday, November 30, 2005, at 04:10  PM, Mike wrote:

> Same problem here. Went back to 2.3.1
>

> --- In QuadtoneRIP@yahoogroups.com, "teeproo" <teeproo@y...> wrote:
>>
>> --- In QuadtoneRIP@yahoogroups.com, "teeproo" <teeproo@y...> wrote:
>>> I have been trying to print on a Epson R800/QuadR800 with QTR in
>>> WinXP, but no luck so far. I have used both version 2.3.2 and 2.3.3
>>> and just about every possible setting in QTR I can think of. If I
>>
>> OK, I figured it out, my Epson R800 is not printing anything using
>> QTR 2.3.2 and 2.3.3, but 2.3.1 works just fine. Anyone else have this
>> problem? The 2.3.3 release notes says R800: fixed, but this is
>> definitely not true in my case.
>>
>> Anyway, I hope you can fix this somehow, now that I have had the
>> possibility to play around with QTR a bit, I really like what I'm
>> seeing, you are most certainly going to get my money. Thanks!
>>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
-
Roy Harrington
roy@...
Black & White Photo Gallery
http://www.harrington.com