Yahoo Groups archive

QTR-Quadtone RIP

Index last updated: 2026-04-28 23:12 UTC

Thread

Failure to print using Epson 2200 (WindowsXPpro)

Failure to print using Epson 2200 (WindowsXPpro)

2006-04-12 by mohonk1986

Gray scale image spools normally to 2200 but printer puhes paper 
through without printing. In the Graphical Interface the image appears 
in the "print" window and as C:\My documents\My Pictures\Name of 
pix.tif. (I checked cartridges and printer with other drivers, no 
problem there). I use Photoshop CS2. "page setup" shows the 2200 
printer but not the Quatone driver - I do not know if that is supposed 
to appear there. I use matte paper, 1400dpi, correct paper size. What 
could I be doing wrong? Thank you for any help you can offer. It is 
very much appreciated.

Re: Failure to print using Epson 2200 (WindowsXPpro)

2006-04-13 by Johnny Eades

You work up your image in Photoshop, save that image and then print it
with QTR outside of Photoshop. I hope this helps.

Your friend in Photography,

Johnny Eades





-- In QuadtoneRIP@yahoogroups.com, "mohonk1986" <joachim2@...> wrote:
Show quoted textHide quoted text
>
> Gray scale image spools normally to 2200 but printer puhes paper 
> through without printing. In the Graphical Interface the image appears 
> in the "print" window and as C:\My documents\My Pictures\Name of 
> pix.tif. (I checked cartridges and printer with other drivers, no 
> problem there). I use Photoshop CS2. "page setup" shows the 2200 
> printer but not the Quatone driver - I do not know if that is supposed 
> to appear there. I use matte paper, 1400dpi, correct paper size. What 
> could I be doing wrong? Thank you for any help you can offer. It is 
> very much appreciated.
>

RE: [QuadtoneRIP] Re: Failure to print using Epson 2200 (WindowsXPpro)

2006-04-13 by joachim oppenheimer

Thank you very much for your kindness. I use PS and save the image as gray scale with .tif - it spools to printer but doesn't print - as if my QTR isn't in the right place to act as the driver. Any further suggestions would be very much appreciated. Joachim
Show quoted textHide quoted text
-----Original Message-----
From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com]On Behalf Of Johnny Eades
Sent: Wednesday, April 12, 2006 9:29 PM
To: QuadtoneRIP@yahoogroups.com
Subject: [QuadtoneRIP] Re: Failure to print using Epson 2200 (WindowsXPpro)

You work up your image in Photoshop, save that image and then print it
with QTR outside of Photoshop. I hope this helps.

Your friend in Photography,

Johnny Eades





-- In QuadtoneRIP@yahoogroups.com, "mohonk1986" wrote:
>
> Gray scale image spools normally to 2200 but printer puhes paper
> through without printing. In the Graphical Interface the image appears
> in the "print" window and as C:\My documents\My Pictures\Name of
> pix.tif. (I checked cartridges and printer with other drivers, no
> problem there). I use Photoshop CS2. "page setup" shows the 2200
> printer but not the Quatone driver - I do not know if that is supposed
> to appear there. I use matte paper, 1400dpi, correct paper size. What
> could I be doing wrong? Thank you for any help you can offer. It is
> very much appreciated.
>




RE: [QuadtoneRIP] Re: Failure to print using Epson 2200 (WindowsXPpro)

2006-04-13 by Tom Moore

Joachim

 

It sounds like you are simply saving the tif file from photoshop. That will
not cause the image to be printed. QTR is a separate application that is
used to print files. You have to run QTR, configure its settings, select the
file to be printed and click on the print button in QTR. It does not operate
as a driver accessible to PS CS2. See pages 6 through 10 of the User Guide
for help on configuring QTR and printing files.

 

Tom Moore

 

  _____
Show quoted textHide quoted text
From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] On
Behalf Of joachim oppenheimer
Sent: Wednesday, April 12, 2006 11:24 PM
To: QuadtoneRIP@yahoogroups.com
Subject: RE: [QuadtoneRIP] Re: Failure to print using Epson 2200
(WindowsXPpro)

 

Thank you very much for your kindness. I use PS and save the image as gray
scale with .tif - it spools to printer but doesn't print - as if my QTR
isn't in the right place to act as the driver. Any further suggestions would
be very much appreciated. Joachim  

-----Original Message-----
From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com]On
Behalf Of Johnny Eades
Sent: Wednesday, April 12, 2006 9:29 PM
To: QuadtoneRIP@yahoogroups.com
Subject: [QuadtoneRIP] Re: Failure to print using Epson 2200 (WindowsXPpro)

You work up your image in Photoshop, save that image and then print it
with QTR outside of Photoshop. I hope this helps.

Your friend in Photography,

Johnny Eades





-- In QuadtoneRIP@yahoogroups.com, "mohonk1986" <joachim2@...> wrote:
>
> Gray scale image spools normally to 2200 but printer puhes paper 
> through without printing. In the Graphical Interface the image appears 
> in the "print" window and as C:\My documents\My Pictures\Name of 
> pix.tif. (I checked cartridges and printer with other drivers, no 
> problem there). I use Photoshop CS2. "page setup" shows the 2200 
> printer but not the Quatone driver - I do not know if that is supposed 
> to appear there. I use matte paper, 1400dpi, correct paper size. What 
> could I be doing wrong? Thank you for any help you can offer. It is 
> very much appreciated.
>








  _____  


YAHOO! GROUPS LINKS 

 

*	 Visit your group "QuadtoneRIP
<http://groups.yahoo.com/group/QuadtoneRIP> " on the web.
  
*	 To unsubscribe from this group, send an email to:
 QuadtoneRIP-unsubscribe@yahoogroups.com
<mailto:QuadtoneRIP-unsubscribe@yahoogroups.com?subject=Unsubscribe> 
  
*	 Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/>  Terms of Service. 

 


  _____

RE: [QuadtoneRIP] Re: Failure to print using Epson 2200 (WindowsXPpro)

2006-04-13 by joachim oppenheimer

Thank you very much. I had tried to print keeping PSC2 open with the desired
image. Once I closed it and selected the image through QuadtoneRIP it worked
nicely. I appreciate your alerting me to an obvious I had missed. Joachim
Show quoted textHide quoted text
  -----Original Message-----
  From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com]On
Behalf Of Tom Moore
  Sent: Thursday, April 13, 2006 1:05 AM
  To: QuadtoneRIP@yahoogroups.com
  Subject: RE: [QuadtoneRIP] Re: Failure to print using Epson 2200
(WindowsXPpro)


  Joachim



  It sounds like you are simply saving the tif file from photoshop. That
will not cause the image to be printed. QTR is a separate application that
is used to print files. You have to run QTR, configure its settings, select
the file to be printed and click on the print button in QTR. It does not
operate as a driver accessible to PS CS2. See pages 6 through 10 of the User
Guide for help on configuring QTR and printing files.



  Tom Moore




----------------------------------------------------------------------------
--

  From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] On
Behalf Of joachim oppenheimer
  Sent: Wednesday, April 12, 2006 11:24 PM
  To: QuadtoneRIP@yahoogroups.com
  Subject: RE: [QuadtoneRIP] Re: Failure to print using Epson 2200
(WindowsXPpro)



  Thank you very much for your kindness. I use PS and save the image as gray
scale with .tif - it spools to printer but doesn't print - as if my QTR
isn't in the right place to act as the driver. Any further suggestions would
be very much appreciated. Joachim

    -----Original Message-----
    From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com]On
Behalf Of Johnny Eades
    Sent: Wednesday, April 12, 2006 9:29 PM
    To: QuadtoneRIP@yahoogroups.com
    Subject: [QuadtoneRIP] Re: Failure to print using Epson 2200
(WindowsXPpro)

    You work up your image in Photoshop, save that image and then print it
    with QTR outside of Photoshop. I hope this helps.

    Your friend in Photography,

    Johnny Eades





    -- In QuadtoneRIP@yahoogroups.com, "mohonk1986" <joachim2@...> wrote:
    >
    > Gray scale image spools normally to 2200 but printer puhes paper
    > through without printing. In the Graphical Interface the image appears
    > in the "print" window and as C:\My documents\My Pictures\Name of
    > pix.tif. (I checked cartridges and printer with other drivers, no
    > problem there). I use Photoshop CS2. "page setup" shows the 2200
    > printer but not the Quatone driver - I do not know if that is supposed
    > to appear there. I use matte paper, 1400dpi, correct paper size. What
    > could I be doing wrong? Thank you for any help you can offer. It is
    > very much appreciated.
    >









----------------------------------------------------------------------------
    YAHOO! GROUPS LINKS

      a..  Visit your group "QuadtoneRIP" on the web.

      b..  To unsubscribe from this group, send an email to:
       QuadtoneRIP-unsubscribe@yahoogroups.com

      c..  Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.


----------------------------------------------------------------------------

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.