2.4.3.10
2006-11-16 by phkowalchuk
Just upgraded. I wonder why every time I use the app, I have to reset my printing model and curves? In the 2.3 version I had prior, this was not the case. Yet my ink limit and gamma adjustments are remembered.
Thread
2.4.3.10
RE: [QuadtoneRIP] 2.4.3.10
2006-11-16 by Stephen Billard
You should not have to. These settings are stored in an "ini" file in your Documents and Settings folder. Look under "Application Data/QuadToneRIP". The only reason the settings might not get updated is if QTRgui does not close normally. -Stephen www.sbillard.org/Stephen
Show quoted textHide quoted text
-----Original Message----- From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] On Behalf Of phkowalchuk Sent: Wednesday, November 15, 2006 10:17 PM To: QuadtoneRIP@yahoogroups.com Subject: [QuadtoneRIP] 2.4.3.10 Just upgraded. I wonder why every time I use the app, I have to reset my printing model and curves? In the 2.3 version I had prior, this was not the case. Yet my ink limit and gamma adjustments are remembered.
RE: [QuadtoneRIP] 2.4.3.10
2006-11-17 by Tom Moore
Stephen My testing seems to confirm that a problem exists in this area. When I start up QTR now, the Printing Model model defaults to Quad2200. If select a curve set within that model, and exit, that curve set is still selected when I restart. However, if I select another model and curve set and then restart, the printer model reverts to Quad2200 Printing Model and the curve selection is reset to blank. This behaviour is different from the previous version (I think). On another note, if I start QTR and while it's already running (which I did by mistake), QTR crashes with an access violation. Obviously I shouldn't be doing that, but I shouldn't be able to cause a crash either. Tom Moore > -----Original Message----- > From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] On > Behalf Of Stephen Billard > Sent: Thursday, November 16, 2006 6:27 PM > To: QuadtoneRIP@yahoogroups.com > Subject: RE: [QuadtoneRIP] 2.4.3.10 > > You should not have to. These settings are stored in an "ini" file in your > Documents and Settings folder. Look under "Application Data/QuadToneRIP". > The > only reason the settings might not get updated is if QTRgui does not close > normally. > ...
Show quoted textHide quoted text
> -----Original Message----- > From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] On > Behalf > Of phkowalchuk > Sent: Wednesday, November 15, 2006 10:17 PM > To: QuadtoneRIP@yahoogroups.com > Subject: [QuadtoneRIP] 2.4.3.10 > > Just upgraded. I wonder why every time I use the app, I have to reset my > printing model and curves? In the 2.3 version I had prior, this was not > the > case. Yet my ink limit and gamma adjustments are remembered. > > >
RE: [QuadtoneRIP] 2.4.3.10
2006-11-17 by Stephen Billard
Both problems are corrected in version 2.4.3.15 now posted on the QTRgui page. -Stephen www.sbillard.org/Stephen
Show quoted textHide quoted text
-----Original Message----- From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] On Behalf Of Tom Moore Sent: Thursday, November 16, 2006 4:49 PM To: QuadtoneRIP@yahoogroups.com Subject: RE: [QuadtoneRIP] 2.4.3.10 Stephen My testing seems to confirm that a problem exists in this area. When I start up QTR now, the Printing Model model defaults to Quad2200. If select a curve set within that model, and exit, that curve set is still selected when I restart. However, if I select another model and curve set and then restart, the printer model reverts to Quad2200 Printing Model and the curve selection is reset to blank. This behaviour is different from the previous version (I think). On another note, if I start QTR and while it's already running (which I did by mistake), QTR crashes with an access violation. Obviously I shouldn't be doing that, but I shouldn't be able to cause a crash either. Tom Moore > -----Original Message----- > From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] > On Behalf Of Stephen Billard > Sent: Thursday, November 16, 2006 6:27 PM > To: QuadtoneRIP@yahoogroups.com > Subject: RE: [QuadtoneRIP] 2.4.3.10 > > You should not have to. These settings are stored in an "ini" file in > your Documents and Settings folder. Look under "Application Data/QuadToneRIP". > The > only reason the settings might not get updated is if QTRgui does not > close normally. > ... > -----Original Message----- > From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] > On Behalf Of phkowalchuk > Sent: Wednesday, November 15, 2006 10:17 PM > To: QuadtoneRIP@yahoogroups.com > Subject: [QuadtoneRIP] 2.4.3.10 > > Just upgraded. I wonder why every time I use the app, I have to reset > my printing model and curves? In the 2.3 version I had prior, this was > not the case. Yet my ink limit and gamma adjustments are remembered. > > > Yahoo! Groups Links
RE: [QuadtoneRIP] 2.4.3.10
2006-11-17 by Tom Moore
Thanks Stephen I tried out the new version. Both problems have been corrected - with lightning speed as usual. Tom Moore
Show quoted textHide quoted text
> -----Original Message----- > From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] On > Behalf Of Stephen Billard > Sent: Thursday, November 16, 2006 9:31 PM > To: QuadtoneRIP@yahoogroups.com > Subject: RE: [QuadtoneRIP] 2.4.3.10 > > Both problems are corrected in version 2.4.3.15 now posted on the QTRgui > page. > > > -Stephen > www.sbillard.org/Stephen >
RE: [QuadtoneRIP] 2.4.3.10
2006-11-17 by Stephen Billard
My thanks to you for the excellent description of how to produce the problems. It is always easier to fix a problem that is well documented. -Stephen www.sbillard.org/Stephen
Show quoted textHide quoted text
-----Original Message----- From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] On Behalf Of Tom Moore Sent: Thursday, November 16, 2006 9:15 PM To: QuadtoneRIP@yahoogroups.com Subject: RE: [QuadtoneRIP] 2.4.3.10 Thanks Stephen I tried out the new version. Both problems have been corrected - with lightning speed as usual. Tom Moore