On 8/11/08, Sarah Renkes <sagaface@...> wrote:
> Thanks Roy...I do have the latest version and did delete the printer first.
>
> Prints have lots of verticle banding, where they didn't have any in Panther. I have tried
> cleaning/head alignment to no avail.
>
> Sarah
>
>
> --- In QuadtoneRIP@yahoogroups.com, "Roy Harrington" <roy@...> wrote:
> >
> > Also you need to download the latest QTR version 2.6.1 for Leopard the
> > previous versions do not work with Leopard. You need to re-install the
> > printer too -- i.e. Delete the printer and run Install2200.
> >
> > Roy
> >
> > On 8/10/08, Sarah Renkes <sagaface@...> wrote:
> > > Thanks so much for your suggestions, Myron...I had previously tried them all and
> nothing
> > > worked. I was able to get QTR to print a few times but the paper sizes were skewed
> and
> > > the prints had intense vericle banding. The Epson driver doesn't print at all, but gives
> me
> > > either the "paper out or not loaded correctly" message or a "generic class waiting for
> > > device" and then just hangs there.
> > >
> > > I'm on a PPC dual G5 and never had any issues with Panther, but don't want to go back
> to
> > > it. It's all incredibly frustrating. Eventually I'll get an r1800, but that is not in my
> economic
> > > stars right now and so this is pretty unfortunate.
> > >
> > > ~sigh~ just when I had a good printing system down.
> > >
> > > Sarah
> > >
> > >
> > > --- In QuadtoneRIP@yahoogroups.com, Myron Gochnauer <goch@> wrote:
> > > >
> > > > I don't know what's wrong, but something is...
> > > >
> > > > I'm using a 2200 and an R1800 with Leopard on an Intel Mac. QTR works
> > > > with both printers, and the Epson driver itself allows the choice of
> > > > color or black (only) ink.
> > > >
> > > > The menus are different, though. Print Settings and Color Management
> > > > are now hidden in the drop down menu in the middle of the screen that
> > > > comes up after you click the Print button. [The choice showing is
> > > > "Layout". Pull down that menu to get to the important stuff. If
> > > > you've chosen the Quad2200 printer, Quadtone RIP will be one of the
> > > > choices.]
> > > >
> > > > When you reinstalled QTR, did you remember to "install" the 2200
> > > > again? ---->
> > > >
> > > > QuadToneRip/Profiles/2100-2200-UC/Install2200.command [if
> > > > you're using Ultra Chrome inks or equivalent]
> > > >
> > > > And you're using the USB port, not Firewire, right? QTR doesn't work
> > > > with Firewire.
> > > >
> > > > If everything is really messed up, reset the printing system:
> > > >
> > > > System Preferences / Print & Fax and then Ctrl-click on any printer
> > > > listed. Resetting the printing system will be one of the choices.
> > > > Then, just for good measure, power off the computer and the printer,
> > > > wait a few seconds and start everything up again. Reinstall the
> > > > printer, and run the QTR install2200.command again. It *should* work.
> > > >
> > > > For what it's worth, I'm having much better luck with the 2200 now
> > > > with an Intel Mac and OS X 10.5.4 than I used to have with my iMac
> > > > (PPC). With the iMac it was a constant struggle to get it to print,
> > > > and to keep it printing once I had it working properly. The Epson
> > > > driver seemed awfully flakey and no other printer (Epson or otherwise)
> > > > gave me any trouble.
> > > >
> > > > Myron
> > > >
> > > >
> > > >
> > > > I'm using QTR with the R1800 and the Epson driver for MIS 3-D inks.
> > > > Everything works as expected
> > > > On 09 Jan, 2008, at 5:47 PM, Sarah Renkes wrote:
> > > >
> > > > > Hi all...(I also posted this in the B&W group)
> > > > >
> > > > > I recently ungraded from Panther to Leopard and can't print at all
> > > > > with my Epson 2200. Not
> > > > > only does QTR not work (I have the latest...I choose paper and
> > > > > settings but nothing prints
> > > > > even though the window shows the file went to the printer...it just
> > > > > sits there.), I'm also
> > > > > getting "paper out or not loaded correctly" messages.
> > > > >
> > > > > I have tried removing/adding the printer and QTR, and changing the
> > > > > Gimp driver to
> > > > > Gutenprint and back....nothing works.
> > > > >
> > > > > Also, and most disturbing....the drop-down menus seem to have
> > > > > changed and I can't find a
> > > > > Black Only option...which is serious.
> > > > >
> > > > > Anyone have a clue? I have spent the last few hours beating my head
> > > > > against this, scouring
> > > > > the net, and am coming up empty.
> > > > >
> > > > > thanks,
> > > > > Sarah
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > >
> > >
> > >
> > >
> > > ------------------------------------
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> >
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>