QTR-Quadtone RIP

Hi,

I have a X-rite 408 color densitometer for sale for european users (230V power supply). 
For the moment I'll sell it exlusively on the QTR site, as I have used this machine to create 
QTR profiles succesfully (for color correction in tinted (warm, cold, neutal, etc) curves and 
the necesary calibration). Check internet for specs.

I will be happy to pass it on for 100 euro's ex. shipment costs.

The sale consists of the densitometer, original protective bag, manual, power supply 
(230V), one ceramic calibration plaque (old), one 1994 color calibration strip. The latter is 
quite accurate, values that are wrong compared to a recently bought strip are corrected 
with a pen by myself. New calibration strips are still available. I have seen them on eBay 
recently.

This densitometer uses Ni-Cad batteries for operation without power supply. While 
connected to the supply, the batteries should charge. I have always used it with old 
batteries that never really charged. That's why I can tell you that when dead batteries are 
used and no power supply is connected the calibration setting are lost. Calibrating will 
take less than a minute, so no problem. Use fresh ni-cad batteries and this problem is 
over.

So you can use this densitometer without  any problem, it is accurate enough for profiling 
QTR, but when you are picky, buy a new calibration card, as the old one is, whell old.

email me if you are interested in buying, I do not check this forum for replies. I'll send you 
pictures if you like.

Payment through PayPal is possible, as is IBAN bank transaction.

Cheers

Sold,

Cheers


--- In QuadtoneRIP@yahoogroups.com, "Piet Weber" <p.weber@...> wrote:
>
> Hi,
> 
> I have a X-rite 408 color densitometer for sale for european users
(230V power supply). 
> For the moment I'll sell it exlusively on the QTR site, as I have
used this machine to create 
> QTR profiles succesfully (for color correction in tinted (warm,
cold, neutal, etc) curves and 
> the necesary calibration). Check internet for specs.
> 
> I will be happy to pass it on for 100 euro's ex. shipment costs.
> 
> The sale consists of the densitometer, original protective bag,
manual, power supply 
> (230V), one ceramic calibration plaque (old), one 1994 color
calibration strip. The latter is 
> quite accurate, values that are wrong compared to a recently bought
strip are corrected 
> with a pen by myself. New calibration strips are still available. I
have seen them on eBay 
> recently.
> 
> This densitometer uses Ni-Cad batteries for operation without power
supply. While 
> connected to the supply, the batteries should charge. I have always
used it with old 
> batteries that never really charged. That's why I can tell you that
when dead batteries are 
> used and no power supply is connected the calibration setting are
lost. Calibrating will 
> take less than a minute, so no problem. Use fresh ni-cad batteries
and this problem is 
> over.
> 
> So you can use this densitometer without  any problem, it is
accurate enough for profiling 
> QTR, but when you are picky, buy a new calibration card, as the old
one is, whell old.
> 
> email me if you are interested in buying, I do not check this forum
for replies. I'll send you 

> pictures if you like.
> 
> Payment through PayPal is possible, as is IBAN bank transaction.
> 
> Cheers
>