QTR-Quadtone RIP

On Thu, Dec 2, 2010 at 7:47 AM, Joel Conison <jcon77@...> wrote:
> I followed Walters other post with more explanation and it worked. I had a power failure due to weather and when I restarted custom sizes was not available. I followed the same instructions, leaving Terminal app open and restarted (the same way I did the first time when it worked). Now custom sizes again is not available. By the way the printer was on. I did it again with the printer off & closed the Terminal app, then restarted. Again, custom sizes are not available.
>
> Any suggestions would be helpful.
>
> Thanks
> Joel

On Dec 2, 2010, at 2:12 PM, Roy Harrington wrote:

> I also found the CUPS 1.4.5 fix to at first work and later on stop working.
> 
> I finally was able to trace through CUPS and figure out where the
> problem arises.
> Its a weird combination of the exact order things are done.  I'm not
> about to fix
> the OS but it turns out there's a simple way for QTR to just rearrange some data
> and the problem goes away.   So I've made a new download 2.7.1 specifically
> for this issue on Macs.  See:   http://www.quadtonerip.com/html/QTRdownload.html
> Its just a matter of installing this new version and if you've done a
> lot of messing
> around with the Quad printers I'd suggest Deleting and Re-creating them with the
> printer/profile install scripts.
> 
> Thanks to Walker for narrowing this down to cups in the new OSX.   If
> you are one of the people
> to go through Walker's CUPS fix, and you also happen to have old
> PowerPC programs on your
> machine, and they access printer info, there's a potential for a
> program crash because of a missing
> powerpc library.   Let me know if this happens.
> 
> I'm pretty sure this fix will solve the custom sizes but let me know
> if you have any trouble.
> 
> Regards,
> Roy
> 
> On Thu, Dec 2, 2010 at 7:47 AM, Joel Conison <jcon77@...> wrote:
>> I followed Walters other post with more explanation and it worked. I had a power failure due to weather and when I restarted custom sizes was not available. I followed the same instructions, leaving Terminal app open and restarted (the same way I did the first time when it worked). Now custom sizes again is not available. By the way the printer was on. I did it again with the printer off & closed the Terminal app, then restarted. Again, custom sizes are not available.
>> 
>> Any suggestions would be helpful.
>> 
>> Thanks
>> Joel
> 
> 
> ------------------------------------
> 
> Yahoo! Groups Links
> 
> 
>

>
> Many thanks for the fix Roy.  Working fine now printing custom sizes from LR, CS5, and Preview.
> 
> Regards,
> Carl
> 
> On Dec 2, 2010, at 2:12 PM, Roy Harrington wrote:
> 
> > I also found the CUPS 1.4.5 fix to at first work and later on stop working.
> > 
> > I finally was able to trace through CUPS and figure out where the
> > problem arises.
> > Its a weird combination of the exact order things are done.  I'm not
> > about to fix
> > the OS but it turns out there's a simple way for QTR to just rearrange some data
> > and the problem goes away.   So I've made a new download 2.7.1 specifically
> > for this issue on Macs.  See:   http://www.quadtonerip.com/html/QTRdownload.html
> > Its just a matter of installing this new version and if you've done a
> > lot of messing
> > around with the Quad printers I'd suggest Deleting and Re-creating them with the
> > printer/profile install scripts.
> > 
> > Thanks to Walker for narrowing this down to cups in the new OSX.   If
> > you are one of the people
> > to go through Walker's CUPS fix, and you also happen to have old
> > PowerPC programs on your
> > machine, and they access printer info, there's a potential for a
> > program crash because of a missing
> > powerpc library.   Let me know if this happens.
> > 
> > I'm pretty sure this fix will solve the custom sizes but let me know
> > if you have any trouble.
> > 
> > Regards,
> > Roy
> > 
> > On Thu, Dec 2, 2010 at 7:47 AM, Joel Conison <jcon77@...> wrote:
> >> I followed Walters other post with more explanation and it worked. I had a power failure due to weather and when I restarted custom sizes was not available. I followed the same instructions, leaving Terminal app open and restarted (the same way I did the first time when it worked). Now custom sizes again is not available. By the way the printer was on. I did it again with the printer off & closed the Terminal app, then restarted. Again, custom sizes are not available.
> >> 
> >> Any suggestions would be helpful.
> >> 
> >> Thanks
> >> Joel
> > 
> > 
> > ------------------------------------
> > 
> > Yahoo! Groups Links
> > 
> > 
> >
>

On Sun, Dec 5, 2010 at 12:06 PM, Danny <dteitel102@...> wrote:
> I went to the download page and don't see a 2.7.1 just 2.7.0.  Am I missing something?  is it somewhere else?  Or is the page not changed but the software fix applied under the old number.  I'd appreciate some enlightenment.
> Thanks much in advance.
> Danny Teitelbaum
>
> --- In QuadtoneRIP@yahoogroups.com, Carl Schofield <list@...> wrote:
>>
>> Many thanks for the fix Roy.  Working fine now printing custom sizes from LR, CS5, and Preview.
>>
>> Regards,
>> Carl
>>
>> On Dec 2, 2010, at 2:12 PM, Roy Harrington wrote:
>>
>> > I also found the CUPS 1.4.5 fix to at first work and later on stop working.
>> >
>> > I finally was able to trace through CUPS and figure out where the
>> > problem arises.
>> > Its a weird combination of the exact order things are done.  I'm not
>> > about to fix
>> > the OS but it turns out there's a simple way for QTR to just rearrange some data
>> > and the problem goes away.   So I've made a new download 2.7.1 specifically
>> > for this issue on Macs.  See:   http://www.quadtonerip.com/html/QTRdownload.html
>> > Its just a matter of installing this new version and if you've done a
>> > lot of messing
>> > around with the Quad printers I'd suggest Deleting and Re-creating them with the
>> > printer/profile install scripts.
>> >
>> > Thanks to Walker for narrowing this down to cups in the new OSX.   If
>> > you are one of the people
>> > to go through Walker's CUPS fix, and you also happen to have old
>> > PowerPC programs on your
>> > machine, and they access printer info, there's a potential for a
>> > program crash because of a missing
>> > powerpc library.   Let me know if this happens.
>> >
>> > I'm pretty sure this fix will solve the custom sizes but let me know
>> > if you have any trouble.
>> >
>> > Regards,
>> > Roy
>> >
>> > On Thu, Dec 2, 2010 at 7:47 AM, Joel Conison <jcon77@...> wrote:
>> >> I followed Walters other post with more explanation and it worked. I had a power failure due to weather and when I restarted custom sizes was not available. I followed the same instructions, leaving Terminal app open and restarted (the same way I did the first time when it worked). Now custom sizes again is not available. By the way the printer was on. I did it again with the printer off & closed the Terminal app, then restarted. Again, custom sizes are not available.
>> >>
>> >> Any suggestions would be helpful.
>> >>
>> >> Thanks
>> >> Joel
>> >
>> >
>> > ------------------------------------
>> >
>> > Yahoo! Groups Links
>> >
>> >
>> >
>>
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>

>
> Your browser probably cached the old page.  Hit the refresh button --  in Safari
> its the circular arrow at the end of url address line.
> 
> Roy
> 
> On Sun, Dec 5, 2010 at 12:06 PM, Danny <dteitel102@...> wrote:
> > I went to the download page and don't see a 2.7.1 just 2.7.0.  Am I missing something?  is it somewhere else?  Or is the page not changed but the software fix applied under the old number.  I'd appreciate some enlightenment.
> > Thanks much in advance.
> > Danny Teitelbaum
> >
> > --- In QuadtoneRIP@yahoogroups.com, Carl Schofield <list@> wrote:
> >>
> >> Many thanks for the fix Roy.  Working fine now printing custom sizes from LR, CS5, and Preview.
> >>
> >> Regards,
> >> Carl
> >>
> >> On Dec 2, 2010, at 2:12 PM, Roy Harrington wrote:
> >>
> >> > I also found the CUPS 1.4.5 fix to at first work and later on stop working.
> >> >
> >> > I finally was able to trace through CUPS and figure out where the
> >> > problem arises.
> >> > Its a weird combination of the exact order things are done.  I'm not
> >> > about to fix
> >> > the OS but it turns out there's a simple way for QTR to just rearrange some data
> >> > and the problem goes away.   So I've made a new download 2.7.1 specifically
> >> > for this issue on Macs.  See:   http://www.quadtonerip.com/html/QTRdownload.html
> >> > Its just a matter of installing this new version and if you've done a
> >> > lot of messing
> >> > around with the Quad printers I'd suggest Deleting and Re-creating them with the
> >> > printer/profile install scripts.
> >> >
> >> > Thanks to Walker for narrowing this down to cups in the new OSX.   If
> >> > you are one of the people
> >> > to go through Walker's CUPS fix, and you also happen to have old
> >> > PowerPC programs on your
> >> > machine, and they access printer info, there's a potential for a
> >> > program crash because of a missing
> >> > powerpc library.   Let me know if this happens.
> >> >
> >> > I'm pretty sure this fix will solve the custom sizes but let me know
> >> > if you have any trouble.
> >> >
> >> > Regards,
> >> > Roy
> >> >
> >> > On Thu, Dec 2, 2010 at 7:47 AM, Joel Conison <jcon77@> wrote:
> >> >> I followed Walters other post with more explanation and it worked. I had a power failure due to weather and when I restarted custom sizes was not available. I followed the same instructions, leaving Terminal app open and restarted (the same way I did the first time when it worked). Now custom sizes again is not available. By the way the printer was on. I did it again with the printer off & closed the Terminal app, then restarted. Again, custom sizes are not available.
> >> >>
> >> >> Any suggestions would be helpful.
> >> >>
> >> >> Thanks
> >> >> Joel
> >> >
> >> >
> >> > ------------------------------------
> >> >
> >> > Yahoo! Groups Links
> >> >
> >> >
> >> >
> >>
> >
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>

>
> Your browser probably cached the old page.  Hit the refresh button --  in Safari
> its the circular arrow at the end of url address line.
> 
> Roy
> 
> On Sun, Dec 5, 2010 at 12:06 PM, Danny <dteitel102@...> wrote:
> > I went to the download page and don't see a 2.7.1 just 2.7.0.  Am I missing something?  is it somewhere else?  Or is the page not changed but the software fix applied under the old number.  I'd appreciate some enlightenment.
> > Thanks much in advance.
> > Danny Teitelbaum
> >
> > --- In QuadtoneRIP@yahoogroups.com, Carl Schofield <list@> wrote:
> >>
> >> Many thanks for the fix Roy.  Working fine now printing custom sizes from LR, CS5, and Preview.
> >>
> >> Regards,
> >> Carl
> >>
> >> On Dec 2, 2010, at 2:12 PM, Roy Harrington wrote:
> >>
> >> > I also found the CUPS 1.4.5 fix to at first work and later on stop working.
> >> >
> >> > I finally was able to trace through CUPS and figure out where the
> >> > problem arises.
> >> > Its a weird combination of the exact order things are done.  I'm not
> >> > about to fix
> >> > the OS but it turns out there's a simple way for QTR to just rearrange some data
> >> > and the problem goes away.   So I've made a new download 2.7.1 specifically
> >> > for this issue on Macs.  See:   http://www.quadtonerip.com/html/QTRdownload.html
> >> > Its just a matter of installing this new version and if you've done a
> >> > lot of messing
> >> > around with the Quad printers I'd suggest Deleting and Re-creating them with the
> >> > printer/profile install scripts.
> >> >
> >> > Thanks to Walker for narrowing this down to cups in the new OSX.   If
> >> > you are one of the people
> >> > to go through Walker's CUPS fix, and you also happen to have old
> >> > PowerPC programs on your
> >> > machine, and they access printer info, there's a potential for a
> >> > program crash because of a missing
> >> > powerpc library.   Let me know if this happens.
> >> >
> >> > I'm pretty sure this fix will solve the custom sizes but let me know
> >> > if you have any trouble.
> >> >
> >> > Regards,
> >> > Roy
> >> >
> >> > On Thu, Dec 2, 2010 at 7:47 AM, Joel Conison <jcon77@> wrote:
> >> >> I followed Walters other post with more explanation and it worked. I had a power failure due to weather and when I restarted custom sizes was not available. I followed the same instructions, leaving Terminal app open and restarted (the same way I did the first time when it worked). Now custom sizes again is not available. By the way the printer was on. I did it again with the printer off & closed the Terminal app, then restarted. Again, custom sizes are not available.
> >> >>
> >> >> Any suggestions would be helpful.
> >> >>
> >> >> Thanks
> >> >> Joel
> >> >
> >> >
> >> > ------------------------------------
> >> >
> >> > Yahoo! Groups Links
> >> >
> >> >
> >> >
> >>
> >
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>