QTR-Quadtone RIP

I know this is old software version wise but I'm looking for RIP that I can control the individual channels, usable with both the 3000 and 1290.

From my research Imageprint 5.6 was the only RIP that could run both the 3000 and 1290, support for both of these printers was dropped in later versions.

Please feel free to correct me if I'm wrong...

Am looking for the Version with both the dongle and relevant codes for both printers

Thanks

Glenn

Was that version of Imageprint for both a PC and Mac?  May need to specify
which hardware platform you're using.

Also, you may want to ensure that the version of the OS that Imageprint 5.6
runs in also supports the other software (and versions) that you need to
run.

-----Original Message-----
From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] On
Behalf Of Glenn
Sent: Sunday, March 20, 2011 7:35 AM
To: QuadtoneRIP@yahoogroups.com
Subject: [QuadtoneRIP] looking for Imageprint 5.6 for 3000 and 1290

I know this is old software version wise but I'm looking for RIP that I can
control the individual channels, usable with both the 3000 and 1290.

From my research Imageprint 5.6 was the only RIP that could run both the
3000 and 1290, support for both of these printers was dropped in later
versions.

Please feel free to correct me if I'm wrong...

Am looking for the Version with both the dongle and relevant codes for both
printers

Thanks

Glenn

Are you sure that Image Print supports control of the individual ink
channels?  



[Non-text portions of this message have been removed]

Thanks Scott and Tim,

I should have come back to modify my request as I've checked out a demo of imageprint and I now know it's not what I'm after function wise.

I have leads on both Wasatch and colorburst which both look more suitable

BTW I can use any platform, Mac (G4 Risc) Win and Linux

Glenn

--- In QuadtoneRIP@yahoogroups.com, "Tim Gray" <timgray@...> wrote:

>
> Are you sure that Image Print supports control of the individual ink
> channels?  
> 
> 
> 
> [Non-text portions of this message have been removed]
>

On 03/25/2011 04:31 PM, Glenn wrote:
> Thanks Scott and Tim,
>
> I should have come back to modify my request as I've checked out a demo of imageprint and I now know it's not what I'm after function wise.
>
> I have leads on both Wasatch and colorburst which both look more suitable
>
> BTW I can use any platform, Mac (G4 Risc) Win and Linux
>
> Glenn
>
> --- In QuadtoneRIP@yahoogroups.com, "Tim Gray"<timgray@...>  wrote:
>>
>> Are you sure that Image Print supports control of the individual ink
>> channels?


The Wasatch SoftRip will allow full channel control on a CMYK model but 
doesn't have full channel control on a CcMmYK or CMYKkk or CcMmYKkk 
models. The "diluted ink" channels are part of the full strength ink 
channels then. It isn't like you get 6 or more channels next to one 
another like in QTR. I don't think the 3000 and 1290 are supported in 
the SoftRip 6.2 version that I have (but not installed) but there could 
be a version for desktop models.


-- 
Met vriendelijke groeten,   Ernst

Try: http://tech.groups.yahoo.com/group/Wide_Inkjet_Printers/

|      Dinkla Grafische Techniek      |
|         www.pigment-print.com        |
|                 ( unvollendet )                 |